© 2017 Kingbright. All Rights Reserved. Spec No: DSAL5014 / 1201007473 Rev No: V.5B Date: 09/27/2017
Page 1 / 6
Part Number
Emitting Color
(Material)
Iv (mcd) @ 20mA
[2]
Viewing Angle
[1]
Code. Min. Max. 2θ1/2
AA3528VRBXS/A-SC-AMT
■ Blue (InGaN)
T 700 1000
120°
U 1000 1300
V 1300 1600
DESCRIPTIONS
The source color devices are made with InGaN
Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
Single color
Suitable for all SMD assembly and solder process
Available on tape and reel
Ideal for backlighting
Package: 2000 pcs / reel
Moisture sensitivity level: 3
RoHS compliant
APPLICATIONS
Traffic signaling
Backlighting (illuminated advertising , general
lighting)
Interior and exterior automotive lighting
Substitution of micro incandescent lamps
Reading lamps
Signal and symbol luminaire for orientation
Marker lights (e.g. Steps, exit ways, etc)
Decorative and entertainment lighting
Indoor and outdoor commercial and residential
architectural lighting
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
SELECTION GUIDE
AA3528VRBXS/A-SC-AMT
3.5 x 2.8 mm Surface Mount LED Lamp
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.