MIC5206-5.0YM5-TR

MIC5206
150mA Low-Noise LDO Regulator
Micrel Mini 8 is a trademark of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (
408
) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
May 2006
M9999-051506
(408) 955-1690
General Description
The MIC5206 is an efficient linear voltage regulator with
very low dropout voltage (typically 17mV at light loads and
165mV at 150mA), and very low ground current (600µA at
100mA output), with better than 1% initial accuracy. It has
a logic compatible enable/shutdown control input and an
internal undervoltage monitor.
Designed especially for hand-held, battery-powered
devices, the MIC5206 can be switched by a CMOS or TTL
compatible logic signal. When disabled, power
consumption drops nearly to zero. Dropout ground current
is minimized to prolong battery life.
Key features include an undervoltage monitor with an error
flag output, a reference bypass pin to improve its already
low-noise performance (8-pin versions only), reversed-
battery protection, current limiting, and overtemperature
shutdown.
The MIC5206 is available in several fixed voltages in a tiny
SOT-23-5 package. It features a pinout, similar to the
LP2980, but has significantly better performance. Fixed
and adjustable output voltage versions, featuring the
reference bypass option, are available in the 8-pin Micrel
Mini 8™ 8-pin MSOP (micro small-outline package).
For low-dropout regulators that are stable with ceramic
output capacitors, see the µCap MIC5245/6/7 family.
Data sheets and support documentation can be found on
Micrel’s web site at www.micrel.com.
Features
Error flag indicates undervoltage fault
High output voltage accuracy
Guaranteed 150mA output
Ultra-low-noise output (8-pin versions)
Low quiescent current
Low dropout voltage
Extremely tight load and line regulation
Very low temperature coefficient
Current and thermal limiting
Reversed-battery protection
“Zero” off-mode current
Logic-controlled electronic enable
Applications
Cellular telephones
Laptop, notebook, and palmtop computers
Battery-powered equipment
PCMCIA V
CC
and V
PP
regulation/switching
Consumer/personal electronics
SMPS post-regulator/dc-to-dc modules
High-efficiency linear power supplies
Typical Application
SOT-23-5 Fixed Voltage Application
Adjustable Voltage Application
Micrel, Inc. MIC5206
May 2006
2
M9999-051506
(408) 955-1690
Ordering Information
Part Number
Standard Marking Pb-Free Marking
Voltage* Junction Temp. Range Package
MIC5206-2.5BM5 LD25 MIC5206-2.5YM5 LD25 2.5V –40° to +125°C 5-Pin SOT-23
MIC5206-2.7BM5 LD27 MIC5206-2.7YM5 LD27 2.7V –40° to +125°C 5-Pin SOT-23
MIC5206-3.0BM5 LD30 MIC5206-3.0YM5 LD30 3.0V –40° to +125°C 5-Pin SOT-23
MIC5206-3.2BM5 LD32 MIC5206-3.2YM5 LD32 3.2V –40° to +125°C 5-Pin SOT-23
MIC5206-3.3BM5 LD33 MIC5206-3.3YM5 LD33 3.3V –40° to +125°C 5-Pin SOT-23
MIC5206-3.6BM5 LD36 MIC5206-3.6YM5 LD36 3.6V –40° to +125°C 5-Pin SOT-23
MIC5206-3.8BM5 LD38 MIC5206-3.8YM5 LD38 3.8V –40° to +125°C 5-Pin SOT-23
MIC5206-4.0BM5 LD40 MIC5206-4.0YM5 LD40 4.0V –40° to +125°C 5-Pin SOT-23
MIC5206-5.0BM5 LD50 MIC5206-5.0YM5 LD50 5.0V –40° to +125°C 5-Pin SOT-23
MIC5206BMM MIC5206YMM ADJ –40° to +125°C 8-Pin MSOP
MIC5206-3.0BMM MIC5206-3.0YMM 3.0V –40° to +125°C 8-Pin MSOP
MIC5206-3.3BMM MIC5206-3.3YMM 3.3V –40° to +125°C 8-Pin MSOP
MIC5206-3.6BMM MIC5206-3.6YMM 3.6V –40° to +125°C 8-Pin MSOP
MIC5206-3.8BMM MIC5206-3.8YMM 3.8V –40° to +125°C 8-Pin MSOP
MIC5206-4.0BMM MIC5206-4.0YMM 4.0V –40° to +125°C 8-Pin MSOP
MIC5206-5.0BMM MIC5206-5.0YMM 5.0V –40° to +125°C 8-Pin MSOP
* Other voltages available. Contact Micrel for details.
Micrel, Inc. MIC5206
May 2006
3
M9999-051506
(408) 955-1690
Pin Configuration
MIC5206-xxBM5/YM5
(Fixed Output Voltage)
MIC5206-xxBMM/YMM
(Fixed Output Voltage)
MIC5206-BMM/YMM
(Adjustable Output Voltage)
Pin Description
Pin Number
SOT-23-5
Pin Number
MSOP-8
Pin Name Pin Function
1 8 IN Supply Input
2 4, 6 GND Ground
3 7 EN
Enable/Shutdown (Input): CMOS compatible input. Logic high = enable,
logic low or open = shutdown. Do not leave floating.
4 3 FLAG
Error Flag (Output): Open-collector output. Active low indicates an output
undervoltage condition
5 (fixed) BYP
Reference Bypass: Connect external 470pF capacitor to GND to reduce output
noise. May be left open
5 (adj.) ADJ
Adjust (Input): Adjustable regulator feedback input. Connect to resistor voltage
divider.
5 1, 2 OUT Regulator Output

MIC5206-5.0YM5-TR

Mfr. #:
Manufacturer:
Description:
LDO Voltage Regulators
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union