Classification No.
Specification
151-EXC-24CF201S
Product Name
Common Mode Noise Filter (Type EXC24CF)
Page
9 of 11
Constitution
Apr. 12, 2007
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
11. Notice for use
1. This specification shows the quality and performance of a unit component. Before adoption, be
sure to evaluate and verify the product mounting it in your product.
2. Precautions on the use of this products.
1) Do not apply current in excess of the rated value because this product may be reduced due to
the magnetic saturation effect.
2) Always wear static control bands to protect against ESD.
3) Keep this products away from all magnets and magnetic object.
3. In traffic transportation equipment (trains, cars, traffic signal equipment, etc.), medical equipment,
aerospace equipment, electric heating appliances, combustion and gas equipment, disaster and
crime preventive equipment, etc. in cases where it is forecast that the failure of this product gives
serious damage to the human life and others, use fail-safe design and ensure safety by studying
the following items.
1) Ensure safety as the system by setting protective circuit and protective equipment.
2) Ensure safety as the system by setting such redundant circuit as do not cause danger by a
signal failure.
4. The products are intended for use in general standard applications for general electronic
equipment (AV products, household electric appliances, office equipment, information and
communication equipment, etc.); hence, they do not take the use under the following special
environments into consideration. Accordingly, the use in the following special environments,
and such environmental conditions may affect the performance of the products; prior to use,
verify the performance, reliability, etc. thoroughly.
1) Use in liquids such as water, oil, chemical, and organic solvent
2) Where the product is close to a heating component, and where an inflammable such as a
polyvinyl chloride wire is arranged close to the product.
3) Use in environment with large static electricity and strong electromagnetic waves
4) Where water or water-soluble detergent is used in cleaning free soldering or in flux cleaning
after soldering(Pay particular attention to soluble flux)
5) Storage in places outside the temperature range of -5 to 40
°C and humidity range of 40 to
60 %RH
6) Use or storage in places exposed to open-air, dusty atmosphere, and direct sunlight
7) Use or storage in places full of corrosive gases such as sea breeze, Cl
2
, H
2
S, NH
3
, SO
2
, and
No
x
8) Use or storage in such a place where the product is wetted due to dew condensation
9) Where the product is sealed or coated with resin, etc.
10) Storage over six months after our delivery (This item also applies to the case where the
storage method specified in item 5) to 8) has been followed.)
5. In case that there are any doubt about safety problems, please inform us early and be sure to
evaluate and verify the product mounting it in your product before adoption.
