1
Non resettable fuses
MSTU 250
www.schurter.com /PG01_2
Fuses
Subminiature Fuse, 8.5 mm, Time-Lag T, 250 VAC, cULus
UL 248-14 · 250 VAC · Time-Lag T
Description
- Directly solderable on printed circuit boards
- Low Breaking Capacity
Standards
- UL 248-14
- CSA C22.2 no. 248.14
Approvals
- UL File Number: E41599
- CSA File Number: 51172
References
Packaging Details
Corresponding Fuseholder FMS (250V)
Weblinks
pdf datasheet, html-datasheet, General Product Information, Packaging
details, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS,
REACH, Distributor-Stock-Check, Detailed request for product
Technical Data
Rated Voltage 250 VAC
Rated current 0.063 - 10 A
Breaking Capacity 50 A
Characteristic Time-Lag T
Mounting PCB,THT
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Housing Thermoplastic, UL 94V-0
Material: Terminals Tin-Plated Copper
Unit Weight 0.53 g
Storage Conditions 0 °C to 40 °C, max. 70% r.h.
Product Marking , Type, Rated current, Rated Voltage,
Characteristic, Approvals
Soldering Methods Wave, Iron
Soldering Profile
Solderability 235 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb
Current Carrying Capacity acc. to EIA/IS-722, Test 4.3.3
Moisture Resistance Test MIL-STD-202, Method 106E
(50 cycles in a temp./mister chamber)
Terminal Strength MIL-STD-202, Method 211A
(Deflection of board 1 mm for 1 minute)
Case Resistance acc. to EIA/IS-722, Test 4.7
>100 MΩ (between leeds and body)
Mechanical Shock (acc. to EIA/IS-722, Test 4.9)
Vibration, High Frequency MIL-STD-202, Method 204D
Shock 20 gn, 20 min, 10-2 kHz, 12 cyc.
Resistance to Solvents MIL-STD-202, Method 215A
Flammability UL 94V-0
(acc. to EIA/IS-722, Test 4.12)
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in
General Product Information
Dimension
8.5 mm
8.54.3
18.8
ø 8.5
3.2
0.5
ø 0.64
5.08
3.2
ø 0.64
5.08
8.5
ø 8.5
0.5
1
+0.1
0
5.08
Drilling diagram