SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
Note.5
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY(Typ.)
AC CURRENT (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
1500ms, 50ms at full load
20ms at full load
88 ~ 264VAC 124 ~ 370VDC
47 ~ 63Hz
84%79% 85% 85% 86% 86%
6.8A/115VAC 3.4A/230VAC
20A/115VAC 40A/230VAC
<1.3mA/240VAC
105 ~ 135% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
UL60950-1, TUV EN60950-1, CCC GB4943.1 EAC TP TC 004 approved
,
-20 ~ +60 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH℃
non-condensing
±℃ ℃0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
116.4K hrs min. MIL-HDBK-217F (25 )℃
170*120*93mm (L*W*H)
File Name:PSP-600-SPEC 2018-01-15
12V5V 13.5V 15V 24V 27V
50A80A 44.5A 40A 25A 22.2A 12.5A
0 ~ 50A0 ~ 80A 0 ~ 44.5A 0 ~ 40A 0 ~ 25A 0 ~ 22.2A 0 ~ 12.5A
600W400W 600.75W 600W 600W 599.4W 600W
240mVp-p180mVp-p 240mVp-p 240mVp-p 240mVp-p 240mVp-p 300mVp-p
10 ~ 13.2V4.75 ~ 5.5V 12 ~ 15V 13.5 ~ 18V 20 ~ 26.4V 24 ~ 30V 41 ~ 56V
±1.0%±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
±0.5%±1.0%
±0.5%±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
PSP-600-12PSP-600-5 PSP-600-13.5 PSP-600-15 PSP-600-24 PSP-600-27 PSP-600-48
1.9Kg; 8pcs/15.5Kg/1.06CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. The operating altitude is 2000 meters for CCC, 3000 meters for UL,TUV. The ambient temperature derating of 5 /1000m is needed for operating altitude℃
greater than 2000m (6500ft).
OVER VOLTAGE
13.8 ~ 16.2V5.75 ~ 6.75V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V
Universal AC input / Full range
Built-in active PFC function
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC fan
With DC OK Signal output
Current sharing up to 2400W(3+1)
Built-in remote ON-OFF control
Built-in remote sense function
Fixed switching frequency at PFC:88KHz PWM:100KHz
Operating altitude up to 3000 meters ( )Note.6
3 years warranty
■
Features :
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
ENVIRONMENT
PROTECTION
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, GB9245, GB17625.1, EAC TP TC 020
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A, EAC TP TC 020
0.95/230VAC 0.99/115VAC at full load
SAFETY &
EMC
(Note 4)
PSP-600 series
Protection type : Shut down o/p voltage, re-power on to recover
REMOTE CONTROL
POK SIGNAL
FUNCTION
RC+/RC-: Short = power on ; Open = power off
PSU turn on: 3.3V ~ 5.6V PSU turn off: 0V ~ 1V
OVER TEMPERATURE
Shut down o/p voltage, re-power on to recover
600W with PFC and Parallel Function
87%
48V
EMC IMMUNITY
EMC EMISSION
( except for 5V,12V,13.5V )
