1
01-2017, Rev. 0117
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
RT-iPower
Power PCB Relay RT Inrush Power
n
1 pole 16A, 1 form A (NO) contact (AgSnO2 or W pre-make contact +
AgSnO2)
n
Mono- or bistable coil
n
5kV/10mm coil-contact
n
Reinforced insulation
n
Test tab (manual operator) optional for bistable versions
n
WG version: product in accordance to IEC60335-1
n
RTS3T: Electronic ballast UL508/NEMA 410 rated
Typical applications
LED lighting systems, filament and incandescent lamp loads, movement
detectors, light sensors, intelligent wall sockets, motors (RTS3L), bus
system actuators.
Approvals
VDE Cert. No. 40007571,UL E214025, cCSAus 1142018
Technical data of approved types on request.
Contact Data RT.3T RTS3L
Contact arrangement 1 form A (NO) contact
Rated voltage 250VAC
Max. switching voltage 480VAC
Rated current 16A
Limiting continuous current 16A, 20A
Limiting making current,
max. 20ms (incand. lamps)
165A peak 120A peak
max. 200µs 800A peak
Breaking capacity max. 4000VA
Contact material W (pre-make cont.) AgSnO
2
+AgSnO
2
Contact style pre-make contact single contact
Frequency of operation, with/without load 360/3600h
-1
Operate/release time max., DC coil 10/5ms
Operate/Reset time max., bistable version 10/10ms
Bounce time max. 4ms
Contact ratings
Type Contact Load Cycles
IEC 61810
RTS3L A (NO) 20A, 250VAC resistive, 70°C 20x10
3
RTS3L monostable A (NO) 16A, 250VAC resistive, 85°C 100x10
3
RTS3T A (NO) 16A, 250VAC resistive, 85°C 5x10
3
UL 508
RTS3L A (NO) 20A, 250VAC, general purpose, 70°C 20x10
3
RTS3L A (NO) 16A, 250VAC, resistive, 85°C 50x10
3
RTS3L A (NO) TV8, 240VAC, 40°C 25x10
3
RTS3L A (NO) 1.5hp, 240VAC, 70°C 30x10
3
RTS3T A (NO) 1200W Tungsten, 120VAC/277VAC,
60Hz, 50°C 6x10
3
RTS3T A (NO) 2A, 480VAC, magnetic ballast, 80°C 10x10
3
*
RTS3T A (NO) 2A, 480VAC, electronic ballast, 80°C 10x10
3
*
RTS3T A (NO) 3A, 277VAC, electronic ballast, 80°C 15x10
3
RTS3T A (NO) 5A, 120VAC, electronic ballast, 80°C 15x10
3
RTS3T A (NO) 5A, 277VAC, electronic ballast, 85°C 10x10
3
RTS3T A (NO) 5A, 347VAC, electronic ballast, 105°C,
with z.c. 10x10
3
*
RTS3T A (NO) 5A, 347VAC, magnetic ballast, 105°C 10x10
3
RTS3T A (NO) 3A, 480VAC, magnetic ballast, 105°C 10x10
3
*
* Special test conditions available on request
Contact Data (continued) RT.3T RTS3L
Mechanical endurance
DC coil >5x10
6
ops. >10x10
6
ops.
bistable version >3x10
6
ops. >5x10
6
ops.
tab manually operated >1x10
3
ops. -
Coil Data, monostable DC coil
Coil voltage range 5 to 110VDC
Operative range, IEC 61810 2
Coil insulation system according UL1446 class F
Coil versions, monostable DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%
1)
mW
005 5 3.5 0.5 62 403
006 6 4.2 0.6 90 400
009 9 6.3 0.9 203 400
012 12 8.4 1.2 360 400
024 24 16.8 2.4 1440 400
048 48 33.6 4.8 5520 417
060 60 42.0 6.0 8570
1)
420
110 110 77.0 11.0 28800
1)
420
1) Coil resistance ±12%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.