Reflow Soldering
For more information on reflow soldering, refer to Ap-
plication Note 1060, Surface Mounting SMT LED Indicator
Components.
Storage Condition:
5 to 30° C @ 60% RH max.
Baking is required under the condition:
a) the blue silica gel indicator becoming white/
transparent color
b) the pack has been opened for more than 672 hours.
Baking recommended condition: 60 ± 5° C for 20 hours.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-4810EN
AV02-0584EN - April 3, 2012
Figure 11. Tape dimensions.
Figure 12. Tape leader and trailer dimensions.
8.00 ± 0.30
(0.315 ± 0.012)
USER FEED
DIRECTION
DIM. A
(SEE TABLE 1)
3.50 ± 0.05
(0.138 ± 0.002)
1.75 (0.069)
DIM. C
(SEE TABLE 1)
0.20 ± 0.05
(0.008 ± 0.002)
CARRIER TAPE
COVER TAPE
DIM. B
(SEE TABLE 1)
4.00 (0.157)
2.00 ± 0.05
(0.079 ± 0.002)
4.00 (0.157)
1.50 (0.059)
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
CATHODE
DIM. A
± 0.10 (± 0.004)
DIM. B
± 0.10 (± 0.004)
PART NUMBER
DIM. C
± 0.10 (± 0.004)
HSMF-C16x 1.75 (0.069) 0.95 (0.037) 0.60 (0.024)
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS INCHES.
2. TOLERANCE IS ± 0.1 MM ± 0.004 IN. UNLESS OTHERWISE SPECIFIED.
END START
THERE SHALL BE A MINIMUM
OF 160 mm (6.3 INCH) OF
EMPTY COMPONENT POCKETS
SEALED WITH COVER TAPE.
MOUNTED WITH
COMPONENTS.
THERE SHALL BE A MINIMUM
OF 160 mm (6.3 INCH) OF
EMPTY COMPONENT POCKETS
SEALED WITH COVER TAPE.
MINIMUM OF
230 mm (9.05 INCH)
MAY CONSIST OF
CARRIER AND/OR
COVER TAPE.