LTC488/LTC489
3
4889fb
DC ELECTRICAL CHARACTERISTICS
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
The l denotes the specifi cations which apply over the full operating
temperature range, otherwise specifi cations are at T
A
= 25°C. V
CC
= 5V (Notes 2, 3), unless otherwise noted.
ORDER INFORMATION
LEAD FREE FINISH TAPE AND REEL PART MARKING PACKAGE DESCRIPTION TEMPERATURE RANGE
LTC488CN#PBF LTC488CN#TRPBF LTC488CN 16-Lead Plastic DIP 0°C to 70°C
LTC488CSW#PBF LTC488CSW#TRPBF LTC488CSW 16-Lead Plastic SO 0°C to 70°C
LTC488IN#PBF LTC488IN#TRPBF LTC488IN 16-Lead Plastic DIP –40°C to 85°C
LTC488ISW#PBF LTC488ISW#TRPBF LTC488ISW 16-Lead Plastic SO –40°C to 85°C
LTC489CN#PBF LTC489CN#TRPBF LTC489CN 16-Lead Plastic DIP 0°C to 70°C
LTC489CSW#PBF LTC489CSW#TRPBF LTC489CSW 16-Lead Plastic SO 0°C to 70°C
LTC489IN#PBF LTC489IN#TRPBF LTC489IN 16-Lead Plastic DIP –40°C to 85°C
LTC489ISW#PBF LTC489ISW#TRPBF LTC489ISW 16-Lead Plastic SO –40°C to 85°C
Consult LTC Marketing for parts specifi ed with wider operating temperature ranges.
Consult LTC Marketing for information on non-standard lead based fi nish parts.
For more information on lead free part marking, go to:
http://www.linear.com/leadfree/
For more information on tape and reel specifi cations, go to:
http://www.linear.com/tapeandreel/
SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
V
INH
Input High Voltage EN, EN, EN12, EN34
l
2.0 V
V
INL
Input Low Voltage EN, EN, EN12, EN34
l
0.8 V
I
IN1
Input Current EN, EN, EN12, EN34
l
±2 μA
I
IN2
Input Current (A, B) V
CC
= 0V or 5.25V, V
IN
= 12V
V
CC
= 0V or 5.25V, V
IN
= – 7V
l
l
1.0
–0.8
mA
mA
V
TH
Differential Input Threshold Voltage for Receiver –7V ≤ V
CM
≤ 12V
l
–0.2 0.2 V
ΔV
TH
Receiver Input Hysteresis V
CM
= 0V 60 mV
V
OH
Receiver Output High Voltage I
O
= –4mA, V
ID
= 0.2V
l
3.5 V
V
OL
Receiver Output Low Voltage I
O
= 4mA, V
ID
= –0.2V
l
0.4 V
I
OZR
Three-State Output Current at Receiver V
CC
= Max 0.4V ≤ V
O
≤ 2.4V
l
±1 μA
I
CC
Supply Current No Load, Digital Pins = GND or V
CC
l
710 mA
R
IN
Receiver Input Resistance –7V ≤ V
CM
≤ 12V, V
CC
= 0V
l
12 kΩ
I
OSR
Receiver Short-Circuit Current 0V ≤ V
O
≤ V
CC
l
785mA
t
PLH
Receiver Input to Output C
L
= 15pF (Figures 1, 3)
l
12 28 55 ns
t
PHL
Receiver Input to Output C
L
= 15pF (Figures 1, 3)
l
12 28 55 ns
t
SKD
| t
PLH
– t
PHL
|
Differential Receiver Skew
C
L
= 15pF (Figures 1, 3) 4 ns
Note 2: All currents into device pins are positive; all currents out of device
pins are negative. All voltages are referenced to device ground unless
otherwise specifi ed.
Note 3: All typicals are given for V
CC
= 5V and T
A
= 25°C.
The l denotes the specifi cations which apply over the full operating temperature range, otherwise specifi cations are at T
A
= 25°C.
V
CC
= 5V ± 5% (Notes 2, 3), unless otherwise noted.
SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
t
ZL
Receiver Enable to Output Low C
L
= 15pF (Figures 2, 4) S1 Closed
l
30 60 ns
t
ZH
Receiver Enable to Output High C
L
= 15pF (Figures 2, 4) S2 Closed
l
30 60 ns
t
LZ
Receiver Disable from Low C
L
= 15pF (Figures 2, 4) S1 Closed
l
30 60 ns
t
HZ
Receiver Disable from High C
L
= 15pF (Figures 2, 4) S2 Closed
l
30 60 ns