LifecyclePhase:
Revision : 1
Expired Period: Forever
Release Date:2014-07-24 09:31:17.0
DATASHEET
SMD B
EAST3527RGA0
12
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 22-JULY-2014.Issue No:
DSE-0011634
www.everlightamericas.com
Label
Desiccant Label
Aluminum moisture-proof bag
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30
℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30
℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5
℃ for 24 hours.
3. Soldering Condition
