PACKING
81g;120pcs/10.72Kg
DC VOLTAGE
SPECIFICATION
MODEL
OUTPUT
RATED CURRENT
CURRENT RANGE
RATED POWER
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
LINE REGULATION
LOAD REGULATION
VOLTAGE RANGE
SETUP, RISE, HOLD UP TIME
EFFICIENCY(Typ.)
DC CURRENT(Typ.)
OVER LOAD
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
DIMENSION
INPUT
PROTECTION
ENVIRONMENT
SAFETY &
OTHERS
NOTE
12V
1.25A
0 ~ 1.25A
15W
100mVp-p
±1.0%
±1.0%
2.5s, 25ms, ----/12VDC/24VDC/48VDC at full load
A: 9.2 ~18VDC (12VDC) B:18 ~ 36VDC (24VDC) C:36~72VDC(48VDC)
74%
1.9A/12VDC 0.9A/24VDC 0.45A/48VDC
105% ~150% rated output power
Protection type : hiccup mode ,recovery automatically after fault condition is removed
5.75 ~ 6.75V
20 ~ 95% RH non-condensing
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
I/P-O/P:2.0KVAC
I/P-O/P:100M Ohms/500VDC / 25 / 70% RH℃
94*49*25mm (L*W*H)
Protections:Short circuit/Over load /Over voltage/Polarity
Cooling by free air convection
100% full load burn-in test
Low cost
High reliability
2 year warranty
15W DC-DC Single Output Switching Power Supply
PSD-15series
-10 ~ +60 (Refer to "Derating Curve")℃
1.All parameters NOT specially mentioned are measured at normal input,rated load and 25 of ambient temperature.
2.Ripple & noise are measued at 20 MHz of bandwidth by using a 12inch twisted pair-wire termined with a 0.1uf & 47uf capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.230 230 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
5.The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
±2.0%
PSD-15C-12
5V
3A
0 ~ 3A
15W
50mVp-p
±1.0%
±1.0%
±2.0%
24V
0.6A
0 ~ 0.6A
14.4W
100mVp-p
±0.5%
±0.5%
±2.0%
67%
72%
13.8~ 16.2V
27.6 ~ 32.4V
EMI CONDUCTION&RADIATION
Compliance to EN55032(CISPR32) CLASS B, EAC TP TC 020
PSD-15A-24
PSD-15A-12
PSD-15B-12
PSD-15B-24
PSD-15C-24
PSD-15C-05
PSD-15B-05
PSD-15A-05
78%
78%
78%
78%
78%
79%
EMS IMMUNITY
Compliance to EN61000-4-2, 3, 4, 6, 8 EN55024, EN61000-6-1, light industry level, criteria A EAC TP TC 020,
Protection type : Shut off o/p voltage, clamping by zener diode
MTBF
740.4Khrs min. MIL-HDBK-217F(25 )℃
File Name:PSD-15-SPEC 2018-01-12
■ Features :
±℃ ℃0.05%/ (0 ~ 50 )
-20 ~ +85 , 10 ~ 95% RH℃
EMC
(Note 4)
SAFETY STANDARDS
EAC TP TC 004 approved
