ISL43112, ISL43113
11
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN6029.3
December 11, 2015
For additional products, see www.intersil.com/en/products.html
Submit Document Feedback
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask
.
Reliability reports are also available from our website at www.intersil.com/support
.
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make sure that
you have the latest revision.
DATE REVISION CHANGE
December 11, 2015 FN6029.3 Applied new Intersil standards to throughout datasheet.
Updated the ordering information table by removing obsolete products, adding notes, and updating the part
marking.
Added the Revision History and About Intersil sections
Updated POD M8.15 to the latest revision the changes are as follows:
-Remove “u” symbol from drawing (overlaps the “a” on Side View).
-Updated to new POD format by removing table and moving dimensions onto drawing and adding land
pattern
-Changed in Typical Recommended Land Pattern the following:
2.41(0.095) to 2.20(0.087)
0.76 (0.030) to 0.60(0.023)
0.200 to 5.20(0.205)
-In Note 1 changed “1982” to “1994”
Updated POD P5.064 to the latest revision the changes are as follows:
-Converted to new format. Moved dimensions from table onto drawing and added land pattern)
