SPECIFICATION
SAFETY &
EMC
(6)
Note.
WITHSTAND VOLTAGE
ISOLATION LEVEL
ISOLATION RESISTANCE
Conducted EN55011(CISPR11)
Radiated
ESD EN61000-4-2
3500Khrs MIL-HDBK-217F(25 )℃
EN55011(CISPR11)
EMC EMISSION
VOLTAGE RANGE
SURGE VOLTAGE (100ms max.)
FILTER
PROTECTION
VOLTAGE ACCURACY
RATED POWER
SHORT CIRCUIT
INPUT
OUTPUT
PROTECTION
ENVIRONMENT
WORKING TEMP.
WORKING HUMIDITY
COOLING
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SOLDERING TEMPERATURE
5Vin models : 9Vdc
12Vin models : 18Vdc
24Vin models : 30Vdc
L: 4.5 ~ 5.5Vdc
M: 10.8 ~ 13.2Vdc
N: 21.6 ~ 26.4Vdc
Internal capacitor
±5.0%
2W
75mVp-p
1.2% for 1% input variation
-40 ~ + (Refer to "Derating Curve")85℃
20% ~ 90% RH non-condensing
Free-air convection
-55 ~ +1 , 10 ~ 95%25 RH non-condensing℃
0.02% / (0 ~ 85 )℃℃
1.5mm from case of 1 ~ 3sec./260 max.℃
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
I/P-O/P:6KVDC or 4.2KVAC
Primary-secondary: 1xMOPP / 2xMOOP when system input voltage is with 250VAC, 50/60Hz
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH℃
5pF
Fuse recommended. 500mA Slow-Blow Type for all models
100KHz
3 second max.
±10%
Parameter Standard
Parameter Standard
Test Level / Note
Test Level / Note
MTBF
DIMENSION (L*W*H)
EMC IMMUNITY
OTHERS
CASE MATERIAL
Non-Conductive black plastic (UL 94V-0 rated)
19.5*9.8*12.5mm (0.77*0.386*0.492 inch)
PACKING
4.2g
NOTE
1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25 70% RH ambient. ℃
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 f & 47 f capacitor. μμ
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Patient leakage current(2 f max.) and reinforced isolation is based on a 250VAC, 50/60Hz system input voltage.μ
6.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please
refer to EMI testing of component power supplies.(as available on http://www.meanwell.com)
File Name:MDS02,MDD02-SPEC 2017-07-14
RIPPLE & NOISE Note.2
LINE REGULATION Note.3
LOAD REGULATION Note.4
SWITCHING FREQUENCY
(Typ.)
ISOLATION CAPACITANCE
(Typ.)
Class B
Class B
Level 2, 8KV contact±
2W SIP Package DC-DC Medical Grade Unregulated Converter
MDS02 & MDD02 series
