FLDWC1321-20-9/90-9 Datasheet FLDWC1321-20-9/90-9, FLDWC1321-16-0/9-9CS3050, FLDWC1321-20-9/90-9CS2959 | P1-P2

Users should evaluate the suitability of this product for their application. Specications are subject to change without notice.

Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specication, without notication to Buyer.

1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,

AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: “901/902...” MAY BE REPLACED BY “Axxx”.) OTHER CODES AND

SUFFIXES MAY BE ADDED TO THE PART NUMBER AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

Page 1 of 2

The TE logo, Tyco Electronics and Raychem are trademarks.

Raychem Wire & Cable

501 Oakside Avenue

Redwood City, CA 94063-3800

Phone: 1-800-227-8816

Fax: 1-650-361-6297

DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL

THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.

REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.

JACKET - RADIATION-CROSSLINKED,

MODIFIED PVDF

COMPONENT WIRES - FLDW+0311

SHIELD -TIN-COATED COPPER

TABLE I. CABLE CONSTRUCTION DETAILS

PART NUMBER

CONDUCTOR

SIZE

(AWG)

SHIELD

SIZE

(AWG)

JACKET THICKNESS

(in.)

OUTSIDE DIAMETER

(in.)

TARGET

WEIGHT

(lbs/1000 ft.)

MINIMUM NOMINAL NOMINAL MAXIMUM

FLDWC1321-26-* 26 36 .008 .010 .121 .127 10.6

FLDWC1321-24-* 24 36 .008 .010 .133 .140 13.1

FLDWC1321-22-* 22 36 .008 .010 .149 .156 16.5

FLDWC1321-20-* 20 36 .008 .010 .165 .173 20.9

FLDWC1321-18-* 18 36 .008 .010 .187 .196 27.7

FLDWC1321-16-* 16 36 .008 .010 .203 .213 33.1

FLDWC1321-14-* 14 36 .008 .010 .237 .249 45.5

FLDWC1321-12-* 12 36 .008 .010 .285 .299 68.7

FLDWD1321-12-* 12 36 .008 .010 .275 .289 63.1

FLDWD1321-10-* 10 36 .008 .010 .333 .350 94.5

FLDWE1321-8-* 8 36 .008 .010 .445 .467 151.

SPECIFICATION CONTROL DRAWING

FLDW+1321

TWO CONDUCTOR CABLE, SHIELDED, JACKETED, 600 VOLT 7-14-10 D

The complete requirements for procuring the cable described herein shall consist of this document and the issue in effect of

Raychem Specication 44 and UL Subject 758, Style 20889, File E303150 and carries UL labels to this effect.

TITLE

Date Revision

SPECIFICATION CONTROL DRAWING

Page 2 of 2 D

FLDW+1321

Revision

SCD

CABLE RATINGS AND ADDITIONAL REQUIREMENTS

TEMPERATURE RATING: 125°C

Maximum continuous conductor temperature

VOLTAGE RATING: 600 volts (rms) at sea level

ACCELERATED AGING: 300 ± 3°C for 6 hours

DIELECTRIC WITHSTAND: 2500 volts (rms), 60 Hz, 1 minute

FLAMMABILITY: 30 seconds (maximum); 3 in. (maximum); no aming of facial tissue

INSULATION ELONGATION AND TENSILE STRENGTH: Test per WCD 3106

Primary Insulation,

Elongation, 150% (minimum)

Tensile Strength, 2500 lbf/in² (minimum)

JACKET COLOR: White preferred

JACKET CONCENTRICITY: 70% (minimum)

JACKET ELONGATION AND TENSILE STRENGTH:

Elongation, 200% (minimum)

Tensile Strength, 4500 lbf/in² (minimum)

JACKET FLAWS:

Spark Test, 1.5 kV (rms)

Impulse Dielectric Test, 6.0 kV (peak)

JACKET WALL THICKNESS: Measure per WCD 3106

Lower Limit: Per Table I

Minimum Average: 0.008 inch

LOW TEMPERATURE-COLD BEND: -65 ± 2°C for 4 hours

SHIELD COVERAGE: 85% (minimum)

VOLTAGE WITHSTAND (Post Environmental): 1000 volts (rms), 60 Hz, 1 minute

PART NUMBER:

The “+” in the part number in the upper right hand corner shall be replaced with a letter designator to

dene conductor stranding (see part numbers in table).

C = 19 Strands D = 37 Strands E = Rope Lay

The “*” in the part numbers on Tables I and II shall be replaced by color code designators with a slash

separating the component wire colors and a dash separating the component wire colors from the jacket color.

1/ Example: AWG 16, 19 strands, black and brown component wires; white jacket: FLDWC1321-16-0/1-9

1/ See footer section on page 1

TABLE II. CABLE PERFORMANCE DETAILS

PART NUMBER

BEND TESTING

MANDREL DIAMETER

(inch) (±3%)

WEIGHT

(lb) (±3%)

ACCELERATED AGING

COLD

BEND

ACCELERATED AGING

COLD

BEND

FLDWC1321-26-* 3.00 3.00 .375 1.50

FLDWC1321-24-* 6.00 6.00 .375 1.50

FLDWC1321-22-* 6.00 6.00 .375 3.00

FLDWC1321-20-* 6.00 6.00 .500 3.00

FLDWC1321-18-* 6.00 6.00 .500 3.00

FLDWC1321-16-* 6.00 6.00 1.00 3.00

FLDWC1321-14-* 6.00 6.00 1.00 9.00

FLDWC1321-12-* 10.0 10.0 1.50 9.00

FLDWD1321-12-* 10.0 10.0 1.50 9.00

FLDWD1321-10-* 10.0 10.0 2.00 9.00

FLDWE1321-8-* 18.0 18.0 2.00 15.0

P1-P2

FLDWC1321-20-9/90-9

Mfr. #:

Buy FLDWC1321-20-9/90-9

Manufacturer:

TE Connectivity

Description:

Hook-up Wire FLDWC1321-20-9/90-9

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

FLDWC1321-20-9/90-9

FLDWC1321-20-9/90-9

Products related to this Datasheet