Industrial Ethernet Solutions
Features
SmartSwarm 341
Configurable user business logic data processing & display engine
Comprehensive data outputs via MQTT, email, SMS and a variety of other
services and database connections
Integrates data from WZZARD, WISE, ADAM & third party devices
Integrates data from internet feeds
Cellular or Ethernet connection to IIoT system
Acts as LAN to WAN bridge for third party device connection
Cellular (EMEA/NATAM support) and wired models available
Asset Integration Gateway
Specification
WZZARD RADIO - 802.15.4E, 2.4 GHZ
Number of Channels 15
Channel Separation 5 MHz
Channel Clear Frequency 2405 + 5* (k-11) MHz
Modulation IEEE 802.15.4 Direct Sequence Spread Spectrum
(DSSS)
Raw Data Rate 250 kbps
Range (25 °C, 50% RH, Indoor 100 m
+2 dBi omni-directional Outdoor 300 m
antenna, antenna 2m) Free Space 1200 m
Receiver Sensitivity Packet Data Error Rate (PER) = 1% -93 dBm
Receiver Sensitivity Packet Data Error Rate PER = 50% -95 dBm
Output Power High Calibration Setting 8 dBm
(delivered to a 50 Ω load) Low Calibration Setting 0 dBm
Ports, LEDs, Antennas
(2) Ethernet Ports RJ45, 10/100 Mbps
SIM (2) Mini SIM, 2FF, 1 supported (rear panel)
LED Indicators PWR, DAT, WAN, ETH, SIM, USR, POE, IN0, IN1, OUT
Wzzard R-SMA connector
RST RESET button (rear panel)
*Optional-3x ANT-ANT, DIV SMA connectors
SD Available for file storage from Node-RED applications
(USB) (currently unsupported)
Power
*Optional - Power Supply 10 – 60 V
DC
(2–Way Molex connector)
Power Consumption Idle: 2.5 W
Average: 4 W
Peak: 11 W
Sleep Mode: 10mW
Environmental
Temperature Range Operating: -40 to +75 °C
Storage: -40 to +85 °C
Temperature Range LTE450 Operating: -20 to +60 °C
Storage: -40 to +85 °C
Humidity Operating: 0 to 95 %
Storage (Non-condensing): 0 to 95 %
Cold Start -35 °C
Operating Altitude 2000 m / 70 kPa
Ingress Protection Rating IP30
Mechanical
Metal case with metal DIN rail
Dimensions 55 x 97 x 125 mm (2.17 x 3.82 x 4.9)
Weight 375 g
Industry Certifications & Approvals
Radio for general LTE ETSI EN 301 511 v9.0.2, ETSI EN 301 908–1 v5.2.1,
ETSI EN 301 908-2 v5.2.1, ETSI EN 301 908-13
v5.2.1
Emissions/ Immunity IEC 61000-6-2:2005, ETSI EN 301 489-1 v1.9.2,
EN 55022:2010
Safety EN 60950-1:06 ed.2 (not Hazardous Locations),
EN 62311:2008
Vehicle E8
Environmental RoHS, RoHS2, REACH, WEEE
Ordering Information
BB-SG30000520-41 2 Ethernet, Dust (no power supply)
BB-SG30000525-41 2 Ethernet, Dust, International Power Supply
BB-SG30300520-41 2 Ethernet, LTE-EMEA, Dust (no power supply)
BB-SG30300525-41 2 Ethernet, LTE-EMEA, Dust, International Power
Supply
BB-SG30500520-41 2 Ethernet, LTE-NATAM, Dust (no power supply)
Introduction
Seamlessly integrate data from diverse systems, devices and sensors into the IoT
The SmartSwarm 341 IIoT gateway is aimed at owners of remote assets wishing to integrate data from their assets into IIoT applications like dashboarding, analytics or predictive
maintenance. Data can be collected from a number of sources, including web feeds, databases and files, as well as from locally connected physical devices and sensors. SmartSwarm
341 includes an interface and manager for B+Bs Wzzard wireless sensor platform that provides robust acquisition and transmission of sensor data without installing cables. For bulk
I/O requirements where cabling is not an issue, it is also compatible with WISE and ADAM Ethernet connected I/O modules.
User Applications
SmartSwarm 341 offers flexible data acquisition, processing and handoff via an inbuilt Node-RED user application environment. Node-RED is a powerful, yet simple to use, application
programming environment optimized for processing data streams. Users drag and drop function nodes to acquire, processes and output data, via an internal web server interface
provided by the SmartSwarm 341. Crucially, the Node-RED environment is contained, meaning that any user error made in programming cannot crash the gateway, which will remain
connected and available for remote management in order to correct errors without site visits. In addition to offering local data processing, the Node-RED environment is also able to
create and serve local dashboards, providing a mechanism to serve summary data to engineers, managers or operational staff.
All product specifications are subject to change without notice. Last updated: 9-Aug-2017
