https://www.phoenixcontact.com/pi/products/2906244
08/19/2018Page3/5
Voltage measuring transducers-MACX MCR-VAC-PT-2906244
Technical data
Connection data
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Stripping length 8 mm
Connection technology Push-in connection
General
Maximum transmission error < 1 % (from a measuring range final value, 45...65Hz)
< 1.3 % (from a measuring range final value, 65...405Hz)
Maximum temperature coefficient < 0.015 %/K
Frequency measuring range 45 Hz ... 405 Hz
Alignment zero ± 20 %
Alignment span ± 20 %
Step response (10-90%) < 180 ms
Test voltage 5.3 kV AC (50 Hz, 1 min.)
Degree of pollution 2
Standards/regulations IEC61010-1
IEC 61010-2-030
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be
minimal deviations.
Color gray
Mounting position any
Assembly instructions Can be aligned with spacing = 10 mm
Conformance CE-compliant
UL, USA/Canada UL 61010 Listed
Standards and Regulations
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Frequency range 45 Hz ... 405 Hz
Standards/regulations IEC61010-1
IEC 61010-2-030
Low Voltage Directive Conformance with Low Voltage Directive
Conformance CE-compliant
UL, USA/Canada UL 61010 Listed
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 50
