MP5013A
5 V, 5 A Programmable Current-Limit
Switch with Over-Voltage Clamp and
Slew-Rate Control in TSOT23-8
MP5013A Rev. 1.0 www.MonolithicPower.com 1
6/18/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2012 MPS. All Rights Reserved.
The Future of Analog IC Technology
DESCRIPTION
The MP5013A is a protection device designed to
protect circuitry on the output (source) from
transients on the input (V
CC
). Also, it protects the
input from undesired shorts and transients
coming from the source.
A small capacitor on DV/DT controls the slew
rate that limits the inrush current at the source.
DV/DT has an internal circuit that allows the
customer to float this pin (no connection) and still
receive 1.4 ms ramp time at the source. The
maximum load at the source is current limited
using a sense FET topology. An external resistor
between I-LIMIT and SOURCE controls the
magnitude of the current limit.
An internal charge pump drives the gate of the
power device, allowing the DMOS power FET to
have a very low on resistance of just 36 m.
The MP5013A protects the source from the input
becoming too low or too high. Under-voltage
lockout ensures that the input remains above the
minimum operating threshold before the power
device turns on. If the input rises above the high
output threshold, the MP5013A limits the source
voltage.
FEATURES
• 3 V to 5.5 V Operating Input Range
• 5.7 V Typical Output Over-Voltage Clamp
• Absolute Maximum Voltage of 22 V
• Input Under-Voltage Lockout
• Low Inrush Current during Start-Up
• Integrated 36 m Power FET
• Enable/Fault Pin
• Adjustable Output Voltage Slew Rate
• Adjustable Current Limit
• Thermal Shutdown Protection
• TSOT23-8 Package
APPLICATIONS
• Storage (HDDs, SSDs)
• Hot-Swap Systems
• Set-Top Boxes
• USB Ports/Hubs
• Gaming
TYPICAL APPLICATION
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Qualit
Assurance.
“MPS” and “The Future of Analog IC Technology” are registered trademarks o
Monolithic Power Systems, Inc.