2
Technical Data 10389
Effective April 2016
FPT1006
Dual conductor high current power inductors
www.eaton.com/elx
Product Specifications
Part Number
5
OCL
1
(nH) ±10%
I
rms
2
(A)
I
sat
3
(A)
DCR
4
(mΩ)
maximum
@ 20°C
FPT1006-340-R 340 19 40.5 1.0
FPT1006-400-R 400 19 35.5 1.0
FPT1006-500-R 500 19 27.5 1.0
FPT1006-580-R 580 19 23.0 1.0
1. Open Circuit Inductance (OCL) Test Parameters: 100 kHz, 0.1 Vrms, 0.0 Adc, +25 °C (Pins 4-2, short 1-3)
2. I
rms
: DC current for an approximate temperature rise of 40 °C without core loss. Derating is necessary for AC currents.
PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the
temperature rise. It is recommended that the temperature of the part not exceed +125 °C under worst case operating
conditions verified in the end application.
3. I
sat
: Peak current for approximately 5% rolloff @ +25 °C
4. DCR tested from pins (1-2) and (3-4)
5. Part Number Definition: FPT1006-xxx-R
FPT1006 = Product code and size
xxx = Inductance value in nH,
-R suffix = RoHS compliant
Note: Hipot: 250 Vdc minimum for 2 seconds, 1.0 mA pins (1-2) and pins (4-3) to core
Dimensions (mm)
Part marking: FPT1006-xxx, xxx = inductance value in nH,
wwllyy=date code, R=revision level
Tolerances are ±0.25 unless stated otherwise
All mounting surfaces to be coplanar within 0.102 mm
Recommended Pad Layout Schematic
0.56
2.8
±0.2
Resist area
FPT1006-XXX
wwllyy R
10.0
±0.5
9.65
±0.3
8.5
±0.3
3
2
0.4
1.2
6.4
max
Pins 1 and 3 connected throug
PCB trace
4
1
3
2
10.0
0.5
1.5
1.5
3.0
1
2
4
3
