OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ADG1612BCPZ-REEL7

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16
1 Ω Typical On Resistance, ±5 V, +12 V,
+5 V, and +3.3 V Quad SPST Switches
Data Sheet
ADG1611/ADG1612/ADG1613
Rev. C Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2009-2015 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
1 Ω typical on resistance
0.2 Ω on resistance flatness
±3.3 V to ±8 V dual-supply operation
3.3 V to 16 V single-supply operation
No V
L
supply required
3 V logic-compatible inputs
Rail-to-rail operation
Continuous current per channel
LFCSP package: 280 mA
TSSOP package: 175 mA
16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP
APPLICATIONS
Communication systems
Medical systems
Audio signal routing
Video signal routing
Automatic test equipment
Data acquisition systems
Battery-powered systems
Sample-and-hold systems
Relay replacements
GENERAL DESCRIPTION
The ADG1611/ADG1612/ADG1613 contain four independent
single-pole/single-throw (SPST) switches. The ADG1611 and
ADG1612 differ only in that the digital control logic is inverted.
The ADG1611 switches are turned on with Logic 0 on the
appropriate control input, while Logic 1 is required for the
ADG1612 switches. The ADG1613 has two switches with
digital control logic similar to that of the ADG1611; the logic is
inverted on the other two switches. Each switch conducts equally
well in both directions when on and has an input signal range that
extends to the supplies. In the off condition, signal levels up to
the supplies are blocked.
The ADG1613 exhibits break-before-make switching action for use
in multiplexer applications. Inherent in the design is the low charge
injection for minimum transients when switching the digital inputs.
The ultralow on resistance of these switches make them ideal
solutions for data acquisition and gain switching applications
where low on resistance and distortion is critical. The on resistance
profile is very flat over the full analog input range, ensuring
excellent linearity and low distortion when switching audio signals.
The CMOS construction ensures ultralow power dissipation, making
them ideally suited for portable and battery-powered instruments.
FUNCTIONAL BLOCK DIAGRAMS
IN1
IN2
IN3
IN4
S1
D1
S2
D2
S3
D3
S4
D4
ADG1611
07981-001
NOTES
1. SWITCHES SHOWN FOR A LOGIC 1 INPUT.
Figure 1.
IN1
IN2
IN3
IN4
S1
D1
S2
D2
S3
D3
S4
D4
ADG1612
07981-033
NOTES
1. SWITCHES SHOWN FOR A LOGIC 1 INPUT.
Figure 2.
NOTES
1. SWITCHES SHOWN FOR A LOGIC 1 INPUT.
IN1
IN2
IN3
IN4
S1
D1
S2
D2
S3
D3
S4
D4
ADG1613
07981-034
Figure 3.
PRODUCT HIGHLIGHTS
1. 1.6 Ω maximum on resistance over temperature.
2. Minimum distortion: THD + N = 0.007%.
3. 3 V logic-compatible digital inputs: V
INH
= 2.0 V, V
INL
= 0.8 V.
4. No V
L
logic power supply required.
5. Ultralow power dissipation: <16 nW.
6. 16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP.
ADG1611/ADG1612/ADG1613 Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications ....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagrams ............................................................... 1
Product Highlights ........................................................................... 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
±5 V Dual Supply ......................................................................... 3
12 V Single Supply ........................................................................ 4
5 V Single Supply .......................................................................... 5
3.3 V Single Supply ........................................................................6
Continuous Current per Channel, S or D ..................................7
Absolute Maximum Ratings ............................................................8
ESD Caution...................................................................................8
Pin Configurations and Function Descriptions ............................9
Typical Performance Characteristics ........................................... 10
Test Circuits ..................................................................................... 13
Terminology .................................................................................... 15
Outline Dimensions ....................................................................... 16
Ordering Guide .......................................................................... 16
REVISION HISTORY
5/15—Rev. B to Rev. C
Changed NC Pin to NIC Pin ........................................ Throughout
Updated Outline Dimensions ....................................................... 16
Changes to Ordering Guide .......................................................... 16
3/12—Rev. A to Rev. B
Changes to Figure 16 ...................................................................... 11
8/09—Rev. 0 to Rev. A
Changes to On Resistance (R
ON
) Parameter, On Resistance Match
Between Channels (∆R
ON
) Parameter, and On Resistance Flatness
(R
FLATON
) Parameter, Table 4 ............................................................ 6
Changes to Figure 7 Caption ......................................................... 10
1/09—Revision 0: Initial Version
Rev. C | Page 2 of 16
Data Sheet ADG1611/ADG1612/ADG1613
SPECIFICATIONS
±5 V DUAL SUPPLY
V
DD
= +5 V ± 10%, V
SS
= −5 V ± 10%, GND = 0 V, unless otherwise noted.
Table 1.
Parameter 25°C
−40°C to
+85°C
−40°C to
+125°C
Unit Test Conditions/Comments
ANALOG SWITCH
Analog Signal Range V
DD
to V
SS
V
On Resistance (R
ON
) 1 Ω typ V
S
= ±4.5 V, I
S
= −10 mA; see Figure 24
1.2 1.4 1.6 Ω max V
DD
= ±4.5 V, V
SS
= ±4.5 V
On Resistance Match Between Channels (∆R
ON
) 0.04 Ω typ V
S
= ±4.5 V, I
S
= −10 mA
0.08 0.09 0.1 Ω max
On Resistance Flatness (R
FL AT(ON)
) 0.2 Ω typ V
S
= ±4.5 V, I
S
= −10 mA
0.25 0.29 0.34 Ω max
LEAKAGE CURRENTS V
DD
= +5.5 V, V
SS
= −5.5 V
Source Off Leakage, I
S
(Off )
±0.1
nA typ
V
S
= ±4.5 V, V
D
= ∓4.5 V; see Figure 25
±0.3 ±1 ±6 nA max
Drain Off Leakage, I
D
(Off ) ±0.1 nA typ
V
S
= ±4.5 V, V
D
= ∓4.5 V; see Figure 25
±0.3 ±1 ±6 nA max
Channel On Leakage, I
D
, I
S
(On) ±0.2 nA typ V
S
= V
D
= ±4.5 V; see Figure 26
±0.4
±1.5
±10
nA max
DIGITAL INPUTS
Input High Voltage, V
INH
2.0 V min
Input Low Voltage, V
INL
0.8 V max
Input Current, I
INL
or I
INH
+0.005 ±0.1 µA typ V
IN
= V
GND
or V
DD
±0.1 µA max
Digital Input Capacitance, C
IN
5 pF typ
DYNAMIC CHARACTERISTICS
1
t
ON
165 ns typ R
L
= 300 Ω, C
L
= 35 pF
212 253 285 ns max V
S
= 2.5 V; see Figure 31
t
OFF
105 ns typ R
L
= 300 Ω, C
L
= 35 pF
137
150
159
ns max
V
S
= 2.5 V; see Figure 31
Break-Before-Make Time Delay, t
D
(ADG1613 Only)
25
ns typ
R
L
= 300 Ω, C
L
= 35 pF
20 ns min V
S1
= V
S2
= 2.5 V; see Figure 32
Charge Injection 140 pC typ V
S
= 0 V, R
S
= 0 Ω, C
L
= 1 nF; see Figure 33
Off Isolation 70 dB typ R
L
= 50 Ω, C
L
= 5 pF, f = 1 MHz;
see Figure 27
Channel-to-Channel Crosstalk 110 dB typ R
L
= 50 Ω, C
L
= 5 pF, f = 1 MHz;
see Figure 28
Total Harmonic Distortion + Noise (THD + N) 0.007 % typ R
L
= 110 Ω, 5 V p-p, f = 20 Hz to 20 kHz;
see Figure 30
−3 dB Bandwidth 42 MHz typ R
L
= 50 Ω, C
L
= 5 pF; see Figure 29
C
S
(Off ) 63 pF typ V
S
= 0 V, f = 1 MHz
C
D
(Off )
63
pF typ
V
S
= 0 V, f = 1 MHz
C
D
, C
S
(On) 154 pF typ V
S
= 0 V, f = 1 MHz
POWER REQUIREMENTS
V
DD
= +5.5 V, V
SS
= −5.5 V
I
DD
0.001 µA typ Digital inputs = 0 V or V
DD
1.0 µA max
V
DD
/V
SS
±3.3/±8 V min/max
1
Guaranteed by design, not subject to production test.
Rev. C | Page 3 of 16
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16

ADG1612BCPZ-REEL7

Mfr. #:
Buy ADG1612BCPZ-REEL7
Manufacturer:
Analog Devices Inc.
Description:
Analog Switch ICs IC 1 Ohm 16V Quad SPST
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet