2902832 Datasheet 2902832 | P1-P3

https://www.phoenixcontact.com/pi/products/2902832

08/19/2018Page1/6

Frequency transducer-MINI MCR-SL-F-UI-NC-2902832

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

The configurable frequency transducer is suitable for the connection of NAMUR proximity sensors as well as

for sensors with NPN and PNP outputs. Configurable via DIP switch and teach-in wheel. Screw connection,

standard configuration.

Product Description

The configurable 3-way isolated frequency transducer is suitable for the connection of NAMUR proximity sensors (IEC 60947-5-6 and EN 50227) as

well as for sensors with NPN and PNP outputs that generate a frequency signal.

The measured values are converted into a linear current or voltage signal.

The device is configured via DIP switches. Alternatively, the frequency range can be configured with extended options via the teach-in wheel. The

measuring transducer supports fault monitoring.

Key Commercial Data

Packing unit 1 STK

GTIN

GTIN 4046356682367

Technical data

Note

Utilization restriction

EMC: class A product, see manufacturer's declaration in the download

area

Dimensions

Width 6.2 mm

Height 93.1 mm

Depth 102.5 mm

Ambient conditions

Ambient temperature (operation) -20 °C ... 65 °C

Ambient temperature (storage/transport) -40 °C ... 85 °C

Input data

Frequency input Frequency input

https://www.phoenixcontact.com/pi/products/2902832

08/19/2018Page2/6

Frequency transducer-MINI MCR-SL-F-UI-NC-2902832

Technical data

Input data

Configurable/programmable Yes

Frequency measuring range 0.002 Hz ... 20 kHz (DIP switch)

Available input sources NPN/PNP transistor outputs

NAMUR initiators

Floating relay contact (dry contact)

Max. input amplitude 30 V (incl. DC voltage)

Output data

Output name Voltage output / current output

Number of outputs 1

Configurable/programmable Yes

Voltage output signal 0 V ... 5 V

1 V ... 5 V

0 V ... 10 V

10 V ... 0 V

Current output signal 0 mA ... 20 mA

4 mA ... 20 mA

20 mA ... 0 mA

20 mA ... 4 mA

Max. output voltage approx. 12.3 V

Max. output current 24.6 mA

Load/output load voltage output ≥ 10 kΩ

Load/output load current output 500 Ω (at 20 mA)

Ripple

< 20 mV

(at 500 Ω)

Step response (0–99%) < 35 ms (At f > 500 Hz)

Power supply

Supply voltage range

9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2

1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the

supply voltage. It can be snapped onto a 35 mm DIN rail according to

EN60715))

Typical current consumption

< 28 mA (at I

OUT

= 20 mA, 24 V DC, load 500 Ω)

Power consumption

< 800 mW (at I

OUT

= 20 mA, 9.6 V DC, load 500 Ω)

Connection data

Connection method Screw connection

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 2.5 mm²

Conductor cross section AWG min. 26

Conductor cross section AWG max. 12

Conductor cross section flexible min. 0.2 mm²

Conductor cross section flexible max. 2.5 mm²

https://www.phoenixcontact.com/pi/products/2902832

08/19/2018Page3/6

Frequency transducer-MINI MCR-SL-F-UI-NC-2902832

Technical data

Connection data

Stripping length 12 mm

Screw thread M3

General

No. of channels 1

Transmission error in the set measuring range 0.1 %

Maximum temperature coefficient 0.01 %/K

Status display LED red

Operating elements Press/slide button

Protective circuit Transient protection

Electrical isolation Basic insulation according to EN 61010

Overvoltage category II

Degree of pollution 2

Rated insulation voltage 50 V AC/DC

Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.)

Electromagnetic compatibility Conformance with EMC directive

Noise emission EN 61000-6-4

Noise immunity

EN 61000-6-2 When being exposed to interference, there may be

minimal deviations.

Color green

Housing material PBT

Mounting position any

Assembly instructions

The T connector can be used to bridge the supply voltage. It can be

snapped onto a 35 mm DIN rail according to EN 60715.

Conformance CE-compliant

ATEX  II 3 G Ex nA IIC T4 Gc X

UL, USA/Canada UL 508 Listed

Class I, Div. 2, Groups A, B, C, D T4

Class I, Zone 2, Group IIC

Certificate of classification DNV GL 14085-15HH

Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2

Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2

Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2

EMC data

Designation Electromagnetic RF field

Standards/regulations EN 61000-4-3

Typical deviation from the measuring range final value 0.1 %

Designation Fast transients (burst)

Standards/regulations EN 61000-4-4

Typical deviation from the measuring range final value 2 %

Designation Conducted interferences

P1-P3 P4-P6

2902832

Mfr. #:

Buy 2902832

Manufacturer:

Phoenix Contact

Description:

Terminal Block Interface Modules MINI MCR-SL-F-UI-NC

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

2902832