Product Details
DIMENSION A DIMENSION B DIMENSION C DIMENSION D
INTERFACE MATERIAL
FINISH
Thermal Performance
ATS PART # ATS-1043-C1-R0
maxiFLOW
TM
Cross Cut
High Performance Heat Sinks
REV3_052912
AIR VELOCITy
THERMAL RESISTANCE (
°C/w UNDUCTED)
FT/MIN M/S AIR FLOW STRAIGHT AIR FLOW SIDEWAYS
200 1.0 1.9 3.6
300 1.5
2.8
400 2.0
2.1
500 2.5
1.6
600 3.0
1.3
1.6
1.3
1.1
1.0
»
For larger heat sinks and higher pre-loads, push pins with
compression springs are an effective mounting choice. The push
pin has a flexible barb at the end that is designed to engage with
a pre-drilled hole in a PWB. The compression spring adds the
necessary force to hold the assembly together. Provides better
thermal performance than comparable size straight fin and pin
fin heat sinks.
» Features proven high performance maxiFLOW™ heat sink spread fin array to
maximize cooling surfaces.
» Ideal for tight spaced components where wider heat sinks can’t be used.
» Provided with pre-assembled thermal interface material centered on base.
» Nylon pushpin with steel compression spring.
» Reccomended through hole size in PCB is 3.00 mm.
1) Dimension C = heat sink height from bottom of the base to the top of the n eld.
2) Thermal performance data are provided for reference only. Actual performance may vary
by application.
3) ATS reserves the right to update or change its products without notice to improve the
design or performance.
4) Contact ATS to learn about custom options available.
20.02 .788
50.8 2.0
HOLE PATTERN B
*Image above is for illustration purposes only.
41 mm 45 mm 25 mm 79 mm CHOMERICS T766 GREEN ANODIZED
DIMENSION A DIMENSION B DIMENSION C DIMENSION D INTERFACE MATERIAL FINISH
