ISC-1210
www.vishay.com
Vishay Dale
Revision: 02-Jun-15
1
Document Number: 34060
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wirewound, Surface Mount, Molded, Shielded Inductors
Note
(1)
Rated DC current based on the maximum temperature rise, not
to exceed 40 °C at +85 °C ambient
FEATURES
• Molded construction provides superior strength
and moisture resistance
• Tape and reel packaging for automatic handling,
2000/reel, EIA-481
• Compatible with vapor phase, infrared and wave
soldering methodsfio
• Shielded construction minimizes coupling to
other components
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
Inductance range: 0.01 μH to 100 μH
Special tolerances available upon request
Operating temperature: -55 °C to +125 °C
Coilform material: Non-magnetic for 0.01 μH to 0.10 μH;
powdered iron for 0.12 μH to 100 μH
TEST EQUIPMENT
• H/P 4342A Q meter with Vishay Dale test fixture or equivalent
• H/P 4191A RF impedance analyzer (for SRF measurements)
• Wheatstone bridge
Note
(1)
Recommended minimum spacing between components
STANDARD ELECTRICAL SPECIFICATIONS
IND.
(μH)
TOL.
TEST
FREQ.
(MHz)
Q
MIN.
SRF
MIN.
(MHz)
DCR
MAX.
()
RATED DC
CURRENT
(mA)
(1)
L & Q
0.010 ± 20 % 50 50 1000 0.10 810
0.012 ± 20 % 50 50 1000 0.11 750
0.015 ± 20 % 50 50 1000 0.12 720
0.018 ± 20 % 50 50 1000 0.13 690
0.022 ± 20 % 50 45 1000 0.15 640
0.027 ± 20 % 50 45 1000 0.17 610
0.033 ± 20 % 50 45 1000 0.18 585
0.039 ± 20 % 50 40 1000 0.24 530
0.047 ± 20 % 50 40 1000 0.26 495
0.056 ± 20 % 50 40 1000 0.28 485
0.068 ± 20 % 50 40 1000 0.35 475
0.082 ± 20 % 50 38 900 0.45 460
0.10 ± 20 % 50 36 700 0.50 450
0.12 ± 20 % 25.2 40 500 0.20 630
0.15 ± 20 % 25.2 40 470 0.20 600
0.18 ± 20 % 25.2 40 400 0.24 580
0.22 ± 20 % 25.2 40 330 0.30 565
0.27 ± 20 % 25.2 40 310 0.33 500
0.33 ± 20 % 25.2 40 280 0.36 475
0.39 ± 20 % 25.2 40 230 0.40 465
0.47 ± 20 % 25.2 40 220 0.44 460
0.56 ± 20 % 25.2 40 200 0.46 455
0.68 ± 20 % 25.2 40 180 0.48 450
0.82 ± 20 % 25.2 40 160 0.50 450
1.0 ± 10 % 7.96 30 120 0.60 400
1.2 ± 10 % 7.96 30 110 0.65 390
1.5 ± 10 % 7.96 30 90.0 0.75 370
1.8 ± 10 % 7.96 30 85.0 0.85 350
2.2 ± 10 % 7.96 30 65.0 0.90 320
2.7 ± 10 % 7.96 30 60.0 1.00 290
3.3 ± 10 % 7.96 30 60.0 1.10 270
3.9 ± 10 % 7.96 30 58.0 1.20 250
4.7 ± 10 % 7.96 30 52.0 1.25 220
5.6 ± 10 % 7.96 30 50.0 1.40 210
6.8 ± 10 % 7.96 30 40.0 1.60 205
8.2 ± 10 % 7.96 30 35.0 1.65 195
10.0 ± 10 % 2.52 30 30.0 2.00 185
12.0 ± 10 % 2.52 30 24.0 2.30 175
15.0 ± 10 % 2.52 30 20.0 2.50 165
18.0 ± 10 % 2.52 30 17.0 2.70. 155
22.0 ± 10 % 2.52 30 16.0 3.10 150
27.0 ± 10 % 2.52 30 14.5 3.30 125
33.0 ± 10 % 2.52 30 14.5 5.10 115
39.0 ± 10 % 2.52 30 14.0 5.90 105
47.0 ± 10 % 2.52 30 13.0 8.00 100
56.0 ± 10 % 2.52 30 11.5 10.0 95
68.0 ± 10 % 2.52 30 11.0 10.0 90
82.0 ± 10 % 2.52 30 11.0 11.0 85
100.0 ± 10 % 0.796 30 6.0 12.0 80
DIMENSIONS in inches [millimeters]
PART MARKING
- Vishay Dale
- Inductance value
- Date code
Guidelines for
Parallel Component
Printed Circuit
Mounting Pads on
ISC-1210 Chip
Inductors
0.030 [0.762]
Typ.
0.098 ± 0.008
[2.49 ± 0.203]
0.040
[1.02]
0.020
(1)
[0.508]
0.039
[1.0]
0.039
[1.0]
0.070 [1.8]
0.118
[3.0]
0.118
[3.0]
0.138
[3.5]
0.073 [1.85]
Ref.
0.087 ± 0.008
[2.21 ± 0.203]
0.126 ± 0.008
[3.20 ± 0.203]
0.028 ± 0.004
[0.711 ± 0.102]
Typ.
0.006 [0.152]
Ref. Typ.
DESCRIPTION
ISC-1210
10 μH
± 10 % ER e3
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC
®
LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
I S C 1 2 1 0 E R 1 0 0 K
PRODUCT
FAMILY
SIZE PACKAGE
CODE
INDUCTANCE
VALUE
TOL.