www.cynergy3.com
© 2017 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO
9001
CERTIFIED
RSF10 Series
High level switch for boiling water
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset 21 7BH PE
RSF10 2017
Telephone +44 (0) 1202 897969
Email:sales@cynergy3.com
Mechanical Dimensions
Many WRAS (approved for use in hot & cold water) and NSF approved variants
Flying lead or M12 connector
Custom versions can be made for particular applications. Please contact Cynergy3 with your requirements.
Pivot out of liquid
High level switch position
Many variants are recognisedUL
components File No. E171218
Technical Specification 14 18 16RSF RSF RSF
Material Polypropylene Polypropylene Polyphenylene
approved approved Sulphide ( )WRAS UL PPS
Colour Opaque White Grey
Temp. Range C -20 / +100 -20 / +100 -10 / +120 *°
°F -4 / +212 -4 / +212 +14 / +248 *
Min. Fluid 0. 0. 0. 5SG 70 80 7
Must close level ( =1) mm mm mmSG 39 39 33
Must open level ( =1) 2 mm 2 mm 2 mmSG 442
* Maximum temperature requires cable to be specified.ETFE
Electrical Specification 25W (Y code) 100W (H code)
Contact Form N/ (N/ ) N/ (N/ )CO CO
Switching Power Max 25 100VA
Switching Voltage Max V 240 300AC
Switching Voltage Max V 120 300DC
Switching Current Max A 0.6 1
All ratings are for resistive load only.
Standard Parts Material Approvals Max Power Leadouts Gasket
RSF RF PP WRAS VA PVC14H100 & NSF 100 1 metre 16/0.2 Nitrile
RSF RF PP WRAS VA PVC14Y100 & NSF 25 1 metre 16/0.2 Nitrile
RSF TG PPS WRAS UL VA ETFE16H050 , & NSF 100 50cm 19/0.2 Viton
RSF RF PPS WRAS, UL VA PVC16H100 & NSF 100 1 metre 16/0.2 Nitrile
RSF TG PPS WRAS VA ETFE16Y050 , UL & NSF 25 50cm 19/0.2 Viton
RSF TG PPS WRAS UL VA ETFE16Y100 , & NSF 25 1 metre 19/0.2 Viton
RSF RF PPS WRAS VA PVC16Y100 , UL & NSF 25 1 metre 16/0.2 Nitrile
RSF RF PP UL UL VA PVC18H100 ( ) 100 1 metre 16/0.2 Nitrile
RSF RF PP UL UL VA PVC18Y100 ( ) 25 1 metre 16/0.2 Nitrile
RSF HF PP WRAS VA14 & NSF 100 NitrileP M12 connector
RSF YF PP WRAS VA14 & NSF 25 NitrileP M12 connector
RSF HFP PPS WRAS UL & NSF VA16 , 100 NitrileM12 connector
RSF F PPS WRAS UL & NSF VA16 , 25 NitrileY P M12 connector
RSF HF PP UL UL VA18 ( ) 100 NitrileP M12 connector
RSF YF PP UL UL VA18 ( ) 25 NitrileP M12 connector
The 10 series drop float has been designedRSF
to eliminate problems associated with
limescale build up around the pivot point of a
conventional float switch. It is also suitable in
more viscous liquids, that might affect the
pivot action of a standard float type.
This particular series is primarily for
applications where a high level condition has
to be monitored.
The drop float actuator allows the switch
housing and float pivots to be located above
the surface of the liquid and provides a
normally closed switch contact, opening as the
liquid level rises. They are manufactured in a
range of materials, with a choice of gasket
material, to suit most commonly used liquids.
Typical applications include wall kettles and
hot vending machines.
Versions available with either flying leads or
M12 circular connector.
There are cable sets available for use with
M12 connector versions.
O 24
Must close
level
33.5
(35.0 for M12 connection version)
69 max.
28º Max.
16.5mm (0.65") dia
Hole in Tank
52
Mounting Surface
(Internal)
M16 x 2
8mm (0.3") max tank wall
Must open
level
Nylon nut
All dimensions are in millimetres (inches)
M12 connection version
Switch on pins 1 & 2
12
3
4
Made in the UK
