https://www.phoenixcontact.com/pi/products/3209537
08/18/2018Page4/6
Feed-through terminal block-PTUD 6-P-3209537
Technical data
Dimensions
Height NS 35/7,5 48 mm
Height NS 35/15 55.5 mm
End cover width 2.2 mm
Connection data
Connection method Push-in connection
Connection in acc. with standard IEC 60947-7-1
Stripping length 12 mm
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 10 mm²
Conductor cross section AWG min. 20
Conductor cross section AWG max. 8
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 6 mm²
Min. AWG conductor cross section, flexible 20
Max. AWG conductor cross section, flexible 10
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
Conductor cross section flexible, with TWIN ferrule min. 0.5 mm²
Conductor cross section flexible, with TWIN ferrule max. 1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, max.
1.5 mm²
Conductor cross section solid min. 1 mm²
Conductor cross section solid max. 10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min. 1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
Conductor cross section flexible, with TWIN ferrule min. 0.5 mm²
Conductor cross section flexible, with TWIN ferrule max. 1.5 mm²
Internal cylindrical gage A5
Connection method Screw connection
Connection in acc. with standard IEC 60947-7-1
Screw thread M4
Tightening torque, min 1.5 Nm
Tightening torque max 1.8 Nm
Stripping length 10 mm
Conductor cross section solid min. 0.5 mm²
