9
Sheet No.: D2-A02601FEN
GP1S53VJ000F
■
Manufacturing Guidelines
●
Soldering Method
Flow Soldering:
Soldering should be completed below 260˚C and within 5 s.
Please take care not to let any external force exert on lead pins.
Please don't do soldering with preheating, and please don't do soldering by refl ow.
Hand soldering
Hand soldering should be completed within 3 s when the point of solder iron is below 350̊C.
Please solder within one time.
Please don't touch the terminals directly by soldering iron.
Soldered product shall treat at normal temperature.
Other notice
Please test the soldering method in actual condition and make sure the soldering works fine, since the
impact on the junction between the device and PCB varies depending on the cooling and soldering
conditions.
Flux
Some fl ux, which is used in soldering, may crack the package due to synergistic effect of alcohol in fl ux and
the rise in temperature by heat in soldering. Therefore, in using fl ux, please make sure that it does not have
any infl uence on appearance and reliability of the photointerrupter.