https://www.phoenixcontact.com/us/products/3025040
09/10/2015Page2/4
Fuse modular terminal block-ZFK 6-DREHSI (5X20)-3025040
Technical data
General
Insulating material group I
Connection in acc. with standard IEC 60947-7-3
Maximum load current
10 A (if used as disconnect terminal block. With fuse, the current is
determined by the fuse used.)
Nominal current I
N
10 A (if used as disconnect terminal block. With fuse, the current is
determined by the fuse used.)
Nominal voltage U
N
800 V (if used as disconnect terminal block. With fuse, the voltage is
determined by the light indicator used.)
Open side panel nein
Dimensions
Width 12 mm
Length 86.5 mm
Height NS 35/7,5 56.5 mm
Height NS 35/15 64 mm
Connection data
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 10 mm²
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 6 mm²
Conductor cross section AWG min. 20
Conductor cross section AWG max. 8
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, max.
1.5 mm²
Connection method Spring-cage connection
Stripping length 12 mm
Classifications
eCl@ss
eCl@ss 4.0 27141116
eCl@ss 4.1 27141116
eCl@ss 5.0 27141116