OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PS2702-1-F3-K-A

P1-P3P4-P6P7-P9P10-P12P13-P15
PS2702-1
R08DS0099EJ0300 Rev.3.00 Page 10 of 13
Jan 29, 2013
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The
flux with a maximum chlorine content of 0.2 Wt% is
recommended.)
120±30 s
(preheating)
220˚C
180˚C
Package Surface Temperature T (˚C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260˚C MAX.
120˚C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic
mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(4) Cautions
• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
<R>
PS2702-1
R08DS0099EJ0300 Rev.3.00 Page 11 of 13
Jan 29, 2013
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-
emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum
ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according to
product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual
operating conditions and thoroughly take variations or the like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
PS2702-1
R08DS0099EJ0300 Rev.3.00 Page 12 of 13
Jan 29, 2013
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter Symbol Spec. Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1) 55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and
random test)
U
pr
= 1.6 × U
IORM
, P
d
< 5 pC
U
IORM
U
pr
707
1 131
V
peak
V
peak
Test voltage (partial discharge test, procedure b for all devices)
U
pr
= 1.875 × U
IORM
, P
d
< 5 pC
U
pr
1 325
V
peak
Highest permissible overvoltage U
TR
6 000 V
peak
Degree of pollution (DIN EN 60664-1 VDE 0110 Part 1) 2
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303
Part 11))
CTI 175
Material group (DIN EN 60664-1 VDE 0110 Part 1) III a
Storage temperature range T
stg
−55 to +150 °C
Operating temperature range T
A
−55 to +100 °C
Isolation resistance, minimum value
V
IO
= 500 V dc at T
A
= 25°C
V
IO
= 500 V dc at T
A
MAX. at least 100°C
Ris MIN.
Ris MIN.
10
12
10
11
Ω
Ω
Safety maximum ratings (maximum permissible in case of fault, see
thermal derating curve)
Package temperature
Current (input current I
F
, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
V
IO
= 500 V dc at T
A
= Tsi
Tsi
Isi
Psi
Ris MIN.
150
300
500
10
9
°C
mA
mW
Ω
<R>
P1-P3P4-P6P7-P9P10-P12P13-P15

PS2702-1-F3-K-A

Mfr. #:
Buy PS2702-1-F3-K-A
Manufacturer:
Renesas Electronics
Description:
Transistor Output Optocouplers Hi-Iso Darling 1-Ch
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet