OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SE5012T-EK1

P1-P3P4-P6P7-P9P10-P11
DATA SHEET
SE5012T: 5 GHz Front End Module with Power Detector
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202395B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 23, 2012 4
Switch Logic Characteristics
Conditions: VCC
= 3.0 V to 5.5 V, V
DD
= VEN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5012T-
EK1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Conditions Min. Typ. Max. Unit
ON
Low Loss Switch
Control Voltage
High State = V
CTL_ON -
V
CTL_OFF
2.8 - 3.6 V
OFF
High Loss Switch
Control Voltage
Low State = V
CTL_OFF -
V
CTL_OFF
0 - 0.3 V
CCTL
Control Input
Capacitance
- - - 100 pF
I
CTL
Control Line Current VCTL = VCTL_ON - 2 10 uA
Switch Control Logic Table
Note: D/C = don’t care
C0 C1 EN Hi/L Lin ANT
ON
OFF
ON
OFF
TX Low Linearity
ON
OFF
ON ON TX High Linearity
OFF OFF OFF D/C
Rx Bypass
OFF
ON
OFF D/C
Rx LNA ON
ON ON
Un-supported state
DATA SHEET
SE5012T: 5 GHz Front End Module with Power Detector
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202395B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 23, 2012 5
AC Electrical Characteristics
Transmit Characteristics
Conditions: VCC = 5.0V, VDD = VEN = C0 = H/L Lin = 3.3V, C1 = 0V, TA = 25 °C, as measured on Skyworks
Solutions’ SE5012T-EV1 evaluation board, unless otherwise noted
Symbol Parameter Conditions Min. Typ. Max. Unit
fL-U Frequency Range - 5.15 - 5.85 GHz
POUT
Output Power
OFDM Signal,
64QAM, EVM
= 3%
High Linearity
Mode
H/L Lin = 3.3V
VCC = 5.0 V - 21 -
dBm
VCC = 3.3 V - 17 -
Low Linearity
Mode
H/L Lin = 0V
VCC = 5.0 V - 17 -
VCC = 3.3 V - 13 -
P1dB
Output 1dB compression point,
No Modulation
VCC = 5.0V - 27 -
dBm
VCC = 3.3V - 23 -
S11 Input Return Loss PIN = -25 dBm - 12 - dB
S21
Small Signal Gain,
P
IN
= -25dBm
5V, High or Low
Linearity Mode
29 - 35 dB
3.3V, High or Low
Linearity Mode
28 - 33
ΔS21 Small Signal Gain Variation
Gain variation over
single 40MHz channel
- - 0.5
dB
Gain Variation over
band
- 3.5 -
S21_3.8 Out of Band Gain Gain at 3.8GHz - - 15 dB
2f
Harmonic P
OUT = 17 dBm, OFDM
- -50 -45.2
dBm/MHz
3f - -50 -45.2
tr, tf Rise and Fall Time - - 0.5 - us
STAB Stability
P
OUT = 17 dBm, 54
Mbps, 64 QAM, VSWR
= 6:1, all phases
All non-harmonically related outputs less
than -50 dBc/100 kHz
Rugged-
ness
Tolerance to output load
mismatching
Constant P
IN
equal to
P
OUT = 21 dBm at
50ohms, 54 Mbps, 64
QAM, VCC = 5.5V,
VSWR = 6:1, all phases
No damage
Robust Robustness to input power
P
IN = 12dBm, CW,
VSWR = 6:1, all phases
No damage
DATA SHEET
SE5012T: 5 GHz Front End Module with Power Detector
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202395B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 23, 2012 6
Receive Characteristics
Conditions: VCC = 3.0 V to 5.5 V, VDD = C1 = 3.3V, VEN = C0 = 0V, TA = 25 °C, as measured on Skyworks
Solutions’ SE5012T-EK1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise
noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FOUT Frequency Range - 5.15 - 5.85 GHz
RX
Insertion Loss
Bypass Mode: C0 = C1 = 0V
- -5 -
dB
RX Gain
High Gain Mode
11 12 -
NF
Noise Figure
High Gain Mode
- 2.5 -
dB
RXRL
Input Return Loss
At the Antenna port
- -11 -
dB
Output Return
Loss
At RX RF output
- -8 -
RxIP1DB
Input P1DB
Measured at ANT Port; High Gain
Mode
- -5 -
dBm
LNA Bypass Mode
- 10 -
Rx_2.4int
Max 2.4Ghz
interferer power
1 dB degradation of IP1DB
- - 0
dBm
TX
LEAK
Transmit Power at
RX Output
V
EN = C0 = H/L Lin = 3.3V, C1 = 0V
24dBm at the ANT port
- -13 -
dBm
T
on/off
T/R on/off
switching speed
C0, C1 (50%) to RF output (10% or
90%)
- 300 - nSec
P1-P3P4-P6P7-P9P10-P11

SE5012T-EK1

Mfr. #:
Buy SE5012T-EK1
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Development Tools 5GHz FEM W Pwr/Det. Eval Kit
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet