SE5008L-EK1

DATA SHEET
SE5008L: 5 GHz WLAN Switch/LNA Front-End
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
202449A Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice September 25, 2012 4
Control Logic Table
Mode#
Mode Description
C0
C1
0 RX Bypass 0 0
1 LNA Enable 0 1
2 TX Enable 1 0
3 All Off 1 1
AC Electrical Characteristics
Transmit Characteristics (ANT-TX port)
Conditions: Vdd = C0 = 3.3 V, C1 = 0V, TA = 25 °C, as measured on Skyworks Solutions’ SE5008L EK1 evaluation
board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FOUT Frequency Range - 4900 - 5850 MHz
TXIL
Insertion Loss
-
- 0.8 0.9
dB
P
IN
Maximum Input
power
Harmonic Contribution from SW or
LNA < -50dBm/Mhz OFDM, 54Mbps
- - 30 dBm
S
11
Input Return Loss
-
- -13 -10
dB
S
22
Output Return Loss
-
- -13 -10
dB
ISOL
SW
Switch Isolation
TX to RX Isolation, Bypass mode
- 36 -
dB
IP1dB Input P1dB -
35 -
dBm
Receive Characteristics (RF- RX port)
Conditions: V
dd
= C1 = 3.3 V, C0 = 0 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5008L EK1 evaluation
board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FOUT Frequency Range - 4900 - 5850 MHz
S21
Receive Gain, LNA
enabled.
13 14 - dB
NF Noise Figure De-embedded to device - 2.2 2.5 dB
S11
Input Return Loss
- -9 -7.5
dB
S22
Output Return Loss
- -10 -6
dB
IP1dB Input P1dB
-5 -3 -
dBm
Rx_2.4int
Max 2.4Ghz
interferer power
1 dB degradation of
IP1DB
- - 0
dBm
S21-BYP
Receive Gain, LNA
bypassed
EN = 0 V
-6 -5 -4
dB
DATA SHEET
SE5008L: 5 GHz WLAN Switch/LNA Front-End
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
202449A Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice September 25, 2012 5
Package Drawing
This package is Pb free and RoHS compliant. The product is also rated MSL1.
Figure 3: SE5008L Package Diagram
DATA SHEET
SE5008L: 5 GHz WLAN Switch/LNA Front-End
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
202449A Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice September 25, 2012 6
Recommended Land and Solder Patterns
Figure 4: SE5008L Recommended Land and Solder Pattern
Package Handling Information
Because of its sensitivity to moisture absorption, instructions on the shipping container label must be followed
regarding exposure to moisture after the container seal is broken, otherwise, problems related to moisture absorption
may occur when the part is subjected to high temperature during solder assembly. The SE5008L is capable of
withstanding a Pb free solder reflow. Care must be taken when attaching this product, whether it is done manually or
in a production solder reflow environment. If the part is manually attached, precaution should be taken to insure that
the device is not subjected to temperatures above its rated peak temperature for an extended period of time. For
details on both attachment techniques, precautions, and handling procedures recommended, please refer to:
Quad Flat No-Lead Module Solder Reflow & Rework Information”, Document Number QAD-00045
Handling, Packing, Shipping and Use of Moisture Sensitive QFN”, Document Number QAD-00044
Caution! Class 1B ESD sensitive device

SE5008L-EK1

Mfr. #:
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Development Tools 5GHz Switch/LNA FEM Eval Kit
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet