corcom.com
Corcom High Current AC Power Line FiltersTE Connectivity
SINGLE PHASE HIGH CURRENT AC POWER LINE FILTERS
EMC Series
Designed to address the need for more dierential mode attenuation in the lower frequency range while still maintaining high
common mode performance. This type of performance is typically needed for motor drives and switch mode power supplies
with increased operating frequencies.
FC Series
The FC filters provide filtering for frequency inverters and variable speed motor drives. Suited for field wiring applications,
these filters are ideal for EMC troubleshooting and field refurbishing. Available in dual stage or single stage (B) versions.
K Series
General purpose common-mode and dierential mode filters particularly suited in applications where pulsed, continuous
and/or intermittent RFI interference is present.
S Series
Filters designed for use when equipment impedance at RF frequencies is high. These filters will better protect equipment from
malfunctions due to conducted interference coming into equipment from the line, especially line-to-line noise and transients.
SB Series
Enhanced performance versions of the B Series RFI filters with reduced size and enhanced performance for high impedance
loads. Low leakage version available that meets current requirements of VDE portable equipment for medical applications.
SK Series
The SK series filters use significantly higher element values than general purpose filters, making them better suited for
equipment with line-to-ground and line-to-line conducted emissions, including switch mode power supplies.
3-PHASE HIGH CURRENT AC POWER LINE FILTERS
A Series
Mid- and high-level dierential and common mode filtering for balanced or unbalanced 3-Phase loads. Eective filtering for
each of the three lines plus the neutral and ground lines.
AYA Series
Cost eective filters that help protect electronics equipment in industrial applications such as uninterruptible power supplies
and industrial control systems.
ADT Series
Designed with very high insertion loss for Delta applications, these 3-Phase filters work well in industrial applications to bring
high current motor drives into compliance with the European EMC directives. It is available with common or dierential mode
coils for the correct protection to fit the application.
AYC Series
The AYC series filters are designed for 3-phase, four-wire, WYE wiring applications. Filtering up to 180 amps for use in
3-phase, noisy industrial applications such as frequency converters.
BCF Series
Compact, lightweight “bookform” filters ideal for applications requiring very high attenuation in the frequency range between
100 kHz and 30 MHz.
CFN Series
Universal, 3-phase power line filter for high current applications. The CFN series is ideal for electrical equipment in factory
automation systems, HVAC systems, heavy industrial machinery, packaging machinery, motors and other 3-Phase power
applications. Available in current ratings from 300A to 600A.
FCD Series
Designed for very noisy Delta applications, they attenuate conducted interference at low and high frequency ranges and
better protect programmable logic controllers from RF noise on the AC power line. The FCD filters better prevent noise from
returning to the line, enabling equipment to meet strict European RFI regulations.
