OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AA4040SGS

P1-P3P4-P6
SPEC NO: DSAL0975 REV NO: V.2 DATE: APR/01/2011 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201006832
4.0x4.0mm RIGHT ANGLE SURFACE MOUNT
LED LAMP
Part Number: AA4040SGS Super Bright Green
Features
z Single color.
z Suitable for all SMT assembly and solder process.
z Available on tape and reel.
z Ideal for backlighting.
z Package : 500pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Description
The Super Bright Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL0975 REV NO: V.2 DATE: APR/01/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201006832
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. As silicone encapsulation is permeable to gases, some corrosive substances such as H
2
S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAL0975 REV NO: V.2 DATE: APR/01/2011 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201006832
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
AA4040SGS Super Bright Green (GaP) Water Clear 15 30
120
°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Green 565
nm I
F=20mA
λD [1] Dominant Wavelength Super Bright Green 568
nm I
F=20mA
Δλ1/2 Spectral Line Half-width Super Bright Green 30
nm I
F=20mA
C Capacitance Super Bright Green 15
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA
I
R Reverse Current Super Bright Green
10 uA VR=5V
Parameter Super Bright Green Units
Power dissipation 62.5 mW
DC Forward Current 25 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
P1-P3P4-P6

AA4040SGS

Mfr. #:
Buy AA4040SGS
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD Green Water Clear 568nm 30mcd
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet