AJ7 (J7) Switches
–4–
AECTB3E 201701-T
■ TV rating type
SPECIFICATIONS
■ Contact rating
Note: * The motor load is in accordance with EN61058-1. Inrush current can be switched up to the value of 6 times the indicated rating.
■ TV rating
■ Characteristics
Note: Test conditions and are complying with NECA C 6571, EN61058-1 and UL1054.
* Except TV rating type
ACTUATOR INDICATIONS ON PRODUCTS MADE TO ORDER
Terminal shape Poles Operating types
Part No.
Without indication With indication
.187 Quick-connect terminal
2-pole ON-OFF
AJ7200BTVF —
— AJ7202BTVF
Soldering terminal
AJ7210BTVF —
— AJ7212BTVF
Type Contact voltage
Resistive load
(Power factor = 1)
Motor load* (EN61058-1)
(Power factor = 0.6)
Inrush load
10A
250V AC
10A 4A 100A (8.3ms)
6A 6A 3A —
Contact voltage
Resistive load Motor load (EN6105801) Capacitor load (EN61058-1) Lamp load (UL1054) Expected electrical life
(Power factor = 1) (Power factor = 0.6) (Inrush load) (TV-5) (at 7 cpm)
120V AC — — — 5/78A Min. 2.5 × 10
4
250V AC 10A 4A 100A (8.3ms) — Min. 10
4
Item Specifications (common to 10A and 6A types)
Expected life
(Min. operations)
Mechanical Min. 5 × 10
4
(at 20 cpm.)
Electrical (at rated load)* Min. 10
4
(at 7 cpm.)
Insulation resistance Min. 100 MΩ (at 500V DC measured by insulation resistive meter) (Between terminals)
Dielectric strength Initial, 2,000 Vrms (detection current: 10 mA) (Between terminals)
Contact resistance Initial, Max. 100mΩ (By voltage drop at 1A, 2 to 4V DC)
Temperature rise (terminal section) Max. 30°C at 6 × 10
3
ope. or less (UL1054), Max. 55°C from 6 × 10
3
ope. to 10
4
(EN61058-1)
Vibration resistance 10 to 55 Hz at double amplitude of 1.5mm (Contact opening Max. 1 msec.)
Shock resistance Min. 490m/s
2
Actuator strength 40 N for 1 minute (operating direction)
Tensile terminal strength 100 N for 1 minute or more (Pull & push direction)
Ambient temperature –25°C to +85°C (no freezing and condensing)
Flame retardancy UL94V-0
Tracking resistance Min. 175
Operating force
(reference characteristics)
1-pole 2.2 ± 1.2N
2-pole 4 ± 2.5N
Contact material AgSnO2 alloy
With indications: The and symbols are located on each side, respectively.
With indications: The symbols is located on the side.
With indication on top
With side indication
(When the “ ” indication is visible on the side of the actuator,
it indicates that the switch is in the “ON” state.)
