Industrial Communication
Features
EKI-5729P
EKI-5729PI
8 GE with PoE + 2GE Industry Ethernet
Proview PoE Switch
Specifications
Communications
Standard IEEE 802.3af/at, 802.3, 802.3u, 802.3ab, 802.3az,
802.3x, 802.1p
LAN 10/100/1000Base-T(X)
Transmission Distance Up to 100 m
Transmission Speed Up to 1000 Mbps
Interface
Connectors 8 x 10/100/1000 BaseT(X) with PoE + 2 x 10/100/1000
BaseT(X)
6-pin removable screw terminal (power & relay)
LED Indicators
System LED P1, P2, P-Fail, Loop, PoE
Port LED status 10/100/1000Base T(X): LNK /ACT, Speed, PoE port
Physical
Enclosure Metal / Aluminum Shell with solid mounting kits
Protection Class IP30
Installation DIN-Rail and Wall-Mount
Dimensions (W x H x D) 74 x 152 x 105 mm (2.913 x 5.984 x 4.137) inch
Environment
Operating Temperature Wide Temp Models: -40 to 75° C (-40 to 167°F)
Standard Models: -25 to 60° C (-4 to 140°F)
Storage Temperature -40 ~ 85°C (-40 ~ 185°F)
Relative Humidity 10 ~ 95% (non-condensing)
Switch Properties
MAC Address 8K entries
Packet Buffer 4.1 Mbit
Switching Capacity 20 Gbps
Power
Power Consumption 6w (System)
Power Input 12-24 Vdc, (7A-3A)
Power Budget 60w @ 24v
50w @ 12v
Certification
Safety UL 61010, e-Mark
EMI CE, FCC Class A
EMS EN 61000-4-2 (ESD) Level 3
EN 61000-4-3 (RS) Level 3;
EN 61000-4-4 (EFT) Level 3
EN 61000-4-5 (Surge) Level 3;
EN 61000-4-6 (CS) Level 3
EN 61000-4-8 (Magnetic Field) Level 3
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Patent http://www.advantech.com/legal/patent
Full Gigabit Ethernet ports and comply with IEEE
802.3af/at PoE standard
Communicates with SCADA software via Modbus/TCP
Communicates with NMS (Networking management system) via SNMP
Port-based QoS for deterministic data transmission
-40 to 75°C operating temperature range (EKI-5729PI)
EMS level 3 protection for extreme outdoor environments
IEEE 802.3az Energy Efficient Ethernet (EEE)
Jumbo Frame Support (Up to 9,216 Bytes)
Supports redundant 12V~24V (9V ~ 36V) power input and P-Fail relay
Loop detection
Introduction
The EKI-5729P and EKI-5729PI switches support Power-over-Ethernet on ports 1 to 8. The switch is classified as power source equipment (PSE). Also it is the world’s first convergence
switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with the NMS
(Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS
for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports.
The switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75°C along with EMS Level 3 protection to repel electromagnetic
interface for industrial resistance. The switches are compliant E-mark for in-vehicle application and surveillance system.
E
13
All product specifications are subject to change without notice. Last updated: 22-Feb-2018
