RP-4800-NO.7-0-SP Datasheet RP-4800-NO.8-0-STK-CS7710, RP-4800-NO.8-0-SP, RP-4800-NO.7-0-SP | P1-P2

RP-4800

Highly expanded, polyolefin

heat-shrinkable tubing

RP-4800 is a radiation-crosslinked

polyolefin material with a 4:1

expansion ratio. It was developed for

a wide range of applications where a

large expansion is required, such as

harness repair. This high expansion

simplifies installation and speeds

repairs. The high expansion of

RP-4800 tubing eliminates the need

to remove connectors or large

transitions and allows for easy

harness assembly and repair. This

heat-shrinkable, flexible, flame-

retardant tubing is also compatible

with Raychem adhesives, providing a

complete environmental seal.

RP-4800 tubing has excellent

physical and mechanical properties

that meet both military and industrial

requirements. It is highly abrasion-

resistant and shows no significant

degradation when exposed to

common solvents and chemicals,

including aviation fuel and hydraulic fluid.

RP-4800 tubing remains flexible at

low temperatures and, for short periods,

can withstand temperatures of up to

300°C without dripping or flowing.

Temperature rating

Full recovery temperature: 121°C

Continuous operating temperature: –55°C to 135°C

Specifications*

Type Raychem Military UL

RP-4800 RT-1122 AMS-DTL-23053/5, Class 1 E35586

*When ordering, always specify latest issue.

Dimensions (millimeters/inches)

Inside diameter Wall thickness

D (min.) d (max.) W

Expanded Recovered after Recovered after

Part number as supplied heating heating**

RP-4800-No.1 25.40 1.00 6.99 0.275 1.14 ± 0.18 0.045 ± 0.007

RP-4800-No.2 50.80 2.00 13.97 0.550 1.14 ± 0.18 0.045 ± 0.007

RP-4800-No.3 76.20 3.00 20.57 0.810 1.14 ± 0.18 0.045 ± 0.007

RP-4800-No.4 101.60 4.00 26.67 1.050 1.14 ± 0.18 0.045 ± 0.007

RP-4800-No.5 25.40 1.00 11.74 0.462 1.14 ± 0.18 0.045 ± 0.007

RP-4800-No.6 60.33 2.37 17.27 0.680 1.14 ± 0.18 0.045 ± 0.007

RP-4800-No.7 76.20 3.00 21.34 0.840 1.14 ± 0.18 0.045 ± 0.007

RP-4800-No.8 95.25 3.75 23.62 0.930 1.14 ± 0.18 0.045 ± 0.007

RP-4800-No.9 114.30 4.50 36.83 1.450 1.14 ± 0.18 0.045 ± 0.007

RP-4800-No.10 38.10 1.50 9.53 0.375 1.14 ± 0.18 0.045 ± 0.007

RP-4800-No.11 19.05 0.75 4.57 0.180 1.14 ± 0.18 0.045 ± 0.007

**Wall thickness will be less if recovery is restricted during shrinkage.

Ordering information

Colors Standard Black

Nonstandard Brown, red, orange, yellow, green, blue, violet, gray, and white

Size selection Always order the largest size that will shrink snugly over the component being covered.

Standard packaging On spools or in 4-foot lengths

Ordering description Specify product name, size, and color; for example, RP-4800-No.6-0 (0=Black).



Fully recovered

after heating

Expanded as supplied

Tyco Electronics Corporation

300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters

Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2

USA United Kingdom Japan Singapore 569507

Tel:(800) 926-2425 (US & Canada) Tel: +44 1793 528171 Tel: +81 44 900 5102 Tel: +65 4866 151

Tel:+1 (650) 361-3860 (All other countries)

Users should independently evaluate the suitability of the product for their application.

For more information about this product visit www.tycoelectronics.com

All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes

no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and

Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the

product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing

without notification to the Buyer which do not affect compliance with any applicable specification.

Specification values

Property Unit Requirement Method of test

Physical Dimensions mm (inches) See reverse ASTM D 2671

Longitudinal change percent +0, –10 ASTM D 2671

Tensile strength psi (MPa) 1500 (10.3) minimum ASTM D 2671

Ultimate elongation percent 200 minimum ASTM D 2671

Secant modulus (expanded) psi (MPa) 2.5 x 10

(172) maximum ASTM D 2671

Specific gravity 1.35 maximum ASTM D 2671

Low-temperature flexibility No cracking See note below

(4 hours at –55°C/–67°F)

Heat shock No dripping, flowing See note below

(4 hours at 250°C/482°F) or cracking

Heat resistance ASTM D 2671

(336 hours at 175°C/

347°F)

Followed by test for:

Ultimate elongation percent 150 minimum ASTM D 2671

Electrical Dielectric strength volts/mil (volts/mm) 500 (19,680) minimum ASTM D 2671

Volume resistivity ohm-cm 10

minimum ASTM D 2671

Chemical Corrosive effect No removal of copper See note below

(16 hours at 175°C/347°F)

Copper stability No brittleness, glazing, See note below

(168 hours at 160°C/

320°F) cracking, or severe

discoloration of tubing.

Followed by test for:

Ultimate elongation percent 200 minimum ASTM D 2671

Flammability, average time seconds 60 maximum ASTM D 2671

of burning 25% maximum flag burn Procedure B

Fungus resistance Rating of 1 or less ASTM G 21

Water absorption percent 0.5 maximum ASTM D 2671

(24 hours at 23°C/73°F)

Fluid resistance ASTM D 2671

(24 hours at 23°C/

73°F) in:

JP-8 fuel (MIL-T-5624)

Skydrol 500

Hydraulic fluid

(MIL-H-5606)

Aviation gasoline 100/300

(MIL-G-5572)

Water

Followed by tests for:

Dielectric strength volts/mil (volts/mm) 400 (15,760) minimum ASTM D 2671

Tensile strength psi (MPa) 1000 (6.9) minimum ASTM D 2671

Note: Consult RT-1122 for specific details about test procedures.

Skydrol is a trademark of Monsanto Company.

Raychem is a trademark of Tyco Electronics Corporation.

P1-P2

RP-4800-NO.7-0-SP

Mfr. #:

Buy RP-4800-NO.7-0-SP

Manufacturer:

TE Connectivity

Description:

Heat Shrink Tubing ST Polyolefin Black Thin Spool

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

RP-4800-NO.7-0-SP

RP-4800-NO.7-0-SP

Products related to this Datasheet