1
Fuses
MSTU 250
https://www.schurter.com /PG01_2
Fuses
Subminiature Fuse, 8.5 mm, Time-Lag T, 250 VAC, cULus
See below:
Approvals and Compliances
UL 248-14 · 250 VAC · Time-Lag T
Description
- Directly solderable on printed circuit boards
- Low Breaking Capacity
References
Packaging Details
Corresponding Fuseholder FMS (250V)
Weblinks
pdf datasheet, html-datasheet, General Product Information, Packaging
details, Distributor-Stock-Check, Detailed request for product
Technical Data
Rated Voltage 250 VAC
Rated current 0.063 - 10 A
Breaking Capacity 50 A
Characteristic Time-Lag T
Mounting PCB,THT
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Housing Thermoplastic, UL 94V-0
Material: Terminals Tin-Plated Copper
Unit Weight 0.53 g
Storage Conditions 0 °C to 40 °C, max. 70% r.h.
Product Marking , Type, Rated current, Rated Voltage,
Characteristic, Approvals
Soldering Methods Wave
Soldering Profile
Solderability 235 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb
Current Carrying Capacity acc. to EIA/IS-722, Test 4.3.3
Moisture Resistance Test MIL-STD-202, Method 106E
(50 cycles in a temp./mister chamber)
Terminal Strength MIL-STD-202, Method 211A
(Deflection of board 1 mm for 1 minute)
Case Resistance acc. to EIA/IS-722, Test 4.7
>100 MΩ (between leeds and body)
Mechanical Shock (acc. to EIA/IS-722, Test 4.9)
Vibration, High Frequency MIL-STD-202, Method 204D
Shock 20 gn, 20 min, 10-2 kHz, 12 cyc.
Resistance to Solvents MIL-STD-202, Method 215A
Flammability UL 94V-0
(acc. to EIA/IS-722, Test 4.12)
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: MSTU 250
Approval Logo Certificates Certification Body Description
UL Approvals UL UL File Number: E41599
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to UL 248-14 Low voltage fuses - Part 14: Additional fuses
Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses
