DIP
H
H–
3
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
TDP Series
Ultra-miniature Surface Mount
Half-pitch Side-Actuated DIP Switches
Specifications
SWITCH FUNCTION: SPST — 2, 4, 6, 8, 10 positions.
CONTACT RATING:
24 V DC, 25 mA (switching).
50 V DC, 100 mA (steady state).
MECHANICAL AND ELECTRICAL LIFE: 1,000 cycles.
CONTACT RESISTANCE: 100 mΩ max.
INSULATION RESISTANCE: 100 MΩ @ 100 V DC min.
DIELECTRIC STRENGTH: 300 V AC min.
STORAGE TEMPERATURE: –40°C to 85°C.
OPERATING TEMPERATURE: –40°C to 85°C.
OPERATING FORCE: 4,9N max.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
PACKAGING: Switches supplied in rigid dispensing tubes in full tube
quantities only, this may affect order quantity. Tape and reel
packaging also available.
Features/Benefits
•
World’s first ultra-miniature SMT half-pitch
side-actuated DIP
•
Side actuation allows visual indication of
on/off position in horizontal applications
•
Process sealed for surface mount soldering
and washable processing
•
RoHS compliant
•
Lead free
Typical Applications
•
Hand-held electronic devices
•
Portable computer and
electronic devices
•
Instrumentation and controls
Materials
CASE & COVER
: glass filled PPS (UL94V-0).
ACTUA
TOR: PA6T (UL94V-0).
CONT
ACTS: Copper alloy with gold plate over nickel plate.
TERMINALS
: Copper alloy, with gold over nickel plate.
All terminals ar
e insert molded.
TAPE SEAL: Polyimide.
Note: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Designation
TDP
Number
of Positions
02
04
06
08
10
Actuator
H0 Flush Actuator
H1 Extended Actuator
Terminations
S Gull wing
Contact Material
B Gold
Tape Seal
(None) with tape
D No tape
Terminal Seal
1 Terminals are sealed
Packaging
(None) Tubes
R Tape and Reel
TDP BS
1
Note: Tape seal is not available with H1 Extended Actuators.
How To Order
The Build-A Switch concept allows you to mix and match options to create the switch you need. Below is a complete
listing of options shown in catalog. To or
der, simply select desired option from each category and place in the appropriate box.
All switches supplied in “OFF” position.