AGX
126
SPECIFICATIONS
1. Contact rating
Remark: Motor load designates an inrush current switching capability of 6 times the indicated rating
2. Characteristics
*Remark: Test condition and judgement are complying with “JIS C4505”, “EN61058” and “UL1054”.
3. Operating characteristics
Remark: With the 3 Form A type sequence operation type, the specifications for the contact where the operation position turns ON first are as per the above table. However,
the specifications for the contact where the operation position turns ON later are delayed by approximatery 0.8 mm compared with the above table.
Number of contact
Resistive load
(cos
φ
] 1)
Motor load* (EN61058-1)
(cos
φ
] 0.6)
Standard type
power switching contact
10.1A 125V AC
10.1A 250V AC
6A 30V DC
3A 48V DC (3 Form A type only)
3A 125V AC
3A 250V AC
Signal switching contact
(3 Form A only)
0.1A 48V DC
Contact Low-level circuit:
1mA 5V DC
—
Type Standard type
Expected
life
Mechanical
(at 60 cpm)
10
6
min.
Electrical
(at 20 cpm, operating speed: 10mm/sec.)
10
5
(at 10.1A 250V AC)
Insulation resistance 100MΩ at 500V DC
Dielectric
strength
Between terminals 2,000Vrms for 1 minute
Between terminals and other exposed
metal parts
2,500Vrms for 1 minute
Between terminals and ground 2,000Vrms for 1 minute
Initial contact resistance 100mΩ Max. (by voltage drop at 1A, 6 to 8V DC)
Temperature rise (terminal portion) Initial 45 deg. Max., After test 55 deg. Max.
Vibration resistance 10 to 55Hz at single amplitude of 0.75mm
Shock resistance Min. 294m/s
2
Actuator strength
49N for 1 minute
(For operating direction)
Tensile terminal strength
Min. 147N
(Pulling for operating direction)
Allowable operating speed Min. 10 to 300mm/second
Allowable operating cycle rate 60 cpm
Temperature resistance –40°C to –45°C: 48 hours, +80°C to +90°C: 48 hours
Ambient temperature –25°C to +85°C (Not freezing nor condensing)
Flame retardancy Min. UL 94V-1
Tracking resistance (CTI) Min. 175
Contact material AgCuO alloy
Contact
arrangement
Part number
Operating
force (O.F.)
Max.
Total operating force
(T.F)
Max. Push button
position: 2.4mm
Free position
(F.P.) Max.
mm
Operating
position (O.P.)
mm
Total travel
position
(T.T.P.) mm
Over travel
(O.T.) Min.
mm
Standard type
10.1A 250V AC
1 Form A AGX105 3.92 N 4.90 N 8 4.8±0.4 2.4 2.0
2 Form A AGX205 3.92 N 4.90 N 8 4.8±0.4 2.4 2.0
1 Form A AGX106 3.92 N 6.86 N 10 7.0±0.4 2.4 4.0
2 Form A AGX206 3.92 N 6.86 N 10 7.0±0.4 2.4 4.0
3 Form A AGX306 2.94 N 5.88 N 10 7.0±0.4 2.4 4.0
Switch.book Seite 126 Donnerstag, 4. Mai 2006 10:05 10
