7-11
DESCRIPTION KIT CONTENTS
S
UPPORT
P
RODUCT
The kit contains an assembled circuit board, software and
documentation to support software and hardware devel-
opment for the Z8S180 and Z85230 system at 18.432 MHz.
The supplied cross assembler and link/loader package
allows full assembly language programming support. A
board resident debug monitor program allows executable
code to be down-loaded and subsequently debugged.
The board comes with sample code to illustrate the use of
Zilog's Z8S180 and Z85230 in a variety of communication
applications.
Supported Devices
Z8S180, Z85230
Specifications
Power Requirements
+5Vdc @ 5A
Dimensions
Width: 5.65 in.
Length: 4.0 in.
Serial Interface
RS-232 @ 9600 baud
Z8S180/ESCC Evaluation Board
CMOS Z8S180 MPU
18.432 MHz Crystal
Socketed 64K/(8K) x 8 EPROM
(Programmed with Debug Monitor and
Device Driver Demonstration Software)
Socketed 32K/(8K) x 8 Static RAM
RS-232C PC Interface
Z8S180 Expansion Header
Z85230 Expansion Header
Reset Switch
NMI Switch
Cables
25-pin RS-232 Cable
Software (IBM
®
PC platform)
ASM800 Z800 Cross Assembler
MOBJ Link/Loader
Resident Debug Monitor and
Device Drivers Demonstration
Software Source Code
Z8S180 Example Software
(a) In ASM800 Assembly
(b) In Microtek MCC80 C and Microtek ASM80 Assembly
Note: Zilog is not responsible for support
and maintenance of the above software.
Z8S18000ZCO
STATIC Z180/ESCC
™
EVALUATION BOARD
DC-4086-02
Zilog’s products are not authorized for use as critical compo-
nents in life support devices or systems unless a specific written
agreement pertaining to such intended use is executed between
the customer and Zilog prior to use. Life support devices or
systems are those which are intended for surgical implantation
into the body, or which sustains life whose failure to perform,
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result in
significant injury to the user.
Zilog, Inc. 210 East Hacienda Ave.
Campbell, CA 95008-6600
Telephone (408) 370-8000
Telex 910-338-7621
FAX 408 370-8056
Internet: http://www.zilog.com
© 1997 by Zilog, Inc. All rights reserved. No part of this document
may be copied or reproduced in any form or by any means
without the prior written consent of Zilog, Inc. The information in
this document is subject to change without notice. Devices sold
by Zilog, Inc. are covered by warranty and patent indemnification
provisions appearing in Zilog, Inc. Terms and Conditions of Sale
only. Zilog, Inc. makes no warranty, express, statutory, implied or
by description, regarding the information set forth herein or
regarding the freedom of the described devices from intellectual
property infringement. Zilog, Inc. makes no warranty of mer-
chantability or fitness for any purpose. Zilog, Inc. shall not be
responsible for any errors that may appear in this document.
Zilog, Inc. makes no commitment to update or keep current the
information contained in this document.
