13/32˝ Diameter Fuses
Dimensions (Inches)
Catalog End Clip B
(To
C D E Hole Fig.
Number Stop Mat.** Finish
End Stop) (Contact) (Height) (Width)
Dia. Ref.
5956-16
N
o Spg. Br. Bright Tin † 0.312 0.71 0.47 0.172 2
5960-07
BeCu Silver 0.168 0.196
5960-09
BeCu Silver 0.20 0.172
5960-44
Spg. Br. Nickel 0.20 0.197
5960-51
Yes Spg. Br. Bright Dip* 0.168
0.387 0.71 0.47
0.196
1
5960-53
Spg. Br. Bright Dip* 0.20 0.172
5960-61-R
Spg. Br. Bright Tin 0.168 0.196
5960-62-R
Spg. Br. Bright Tin 0.168 0.132
5960-63-R
Spg. Br. Bright Tin 0.20 0.172
5960-64-R
Spr. Br. Bright Tin 0.20 0.128
Fuse Clips with Mounting Holes 5000
For 1/4˝, 9/32˝, 13/32”, and 9/16˝ Diameter Fuses
Series
Dimensional Data
1/4˝ Diameter Fuses
Dimensions (Inches)
Catalog End Clip B
(To
C D E Hole Fig.
Number Stop Mat.** Finish
End Stop) (Contact) (Height) (Width)
Dia. Ref.
5681-08
N
o Spg. Br. Nickel
† 0.265 0.41 0.32 0.132 2
5681-15-R
Spg. Br. Bright Tin
5682-01
BeCu Silver 0.108
5682-02
BeCu Silver
5682-11
Yes BeCu Albaloy 0.132 0.262 0.41 0.32 0.132 1
5682-41-R
Spg. Br. Bright Tin 0.106
5682-44-R
Spg. Br. Bright Tin 0.132
C
D
E
B
C
D
E
Figure 1
Figure 2
9/32˝ Diameter Fuses
Dimensions (Inches)
Catalog End Clip B
(To
C D E Hole Fig.
Number Stop Mat.** Finish
End Stop) (Contact) (Height) (Width)
Dia. Ref.
5672-11
No Spg. Br. Bright Tin † 0.362 0.52 0.38 0.172 2
5674-01
BeCu Silver
5674-10
Yes BeCu Bright Tin 0.168 0.356 0.52 0.38 0.172 1
5674-41
Spg. Br. Bright Tin
* Bright Dip is actually treated bare metal with no plating.
** Spg. Br. — Spring Bronze; BeCu — Beryllium Copper.
† Hole in center of both clip and contact area.
9/16˝ Diameter Fuses
Dimensions (Inches)
Catalog End Clip B
(To
C D E Hole Fig.
Number Stop Mat.** Finish
End Stop) (Contact) (Height) (Width)
Dia. Ref.
5591-42
Spg. Br. Bright Dip*
0.26 0.51 0.89 0.60 0.172 1
5591-52
Spg. Br. Bright Tin
5592-01
BeCu Silver 0.20
5592-11
No Spg. Br. Silver
0.252 0.56 0.89 0.60
0.20
2
Yes
No
Yes
Yes
Yes
No
• Clips are made of a spring bronze of distinctly superior
quality. This metal gives clips great gripping strength and
ability to retain fuses under adverse conditions.
• Beryllium copper is by far the most satisfactory metal yet
discovered for use in fuse clips. It has the ability to retain
spring pressure better than any other metal under high
c
urrent and high ambient conditions. It also has
exceedingly high electrical conductivity.
© 2 01 2 Cooper Bu ss mann
St . Lo ui s, MO 63178
ww w.co op erbussm an n. co m
1012 BU-SB08760 Page 1 of 1 Data Sheet 2132
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of
this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical informa-
tion that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of
any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice,
any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
