SPECIFICATION CONTROL DRAWING
REV:
B
DATE:
AUG 17, 2006
Wire and Harnessing Products
Raychem Wire and
Harnessing Products
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
HEXASHIELD ADAPTOR FOR
CODE 54 CONNECTORS-
PLAIN CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
This drawing and the information set forth hereon is the
property of Tyco Electronics and is to be held in trust and
confidence. Publication, duplication, disclosure or use for
any other purpose not expressly authorized in writing by
Tyco Electronics is prohibited.
DOCUMENT NO.
HEX54-AY-YY-YY-AYY-1-YY
DRAWN:
CRJ
DATE:
MAR 00
Tyco Electronics reserves the right to amend this drawing at
any time. Users should evaluate the suitability of the
product for their application.
FILE:
Hex54-1scd-us
File & DCR #
D060254
SCALE:
NONE
SHEET:
4 OF 4
Print Date: 18-Aug-06 If this document is printed it becomes uncontrolled. Check for the latest revision.
NOTES!
1. Item 4 - Star - is not
supplied with Hexashield Order Number 09.
2. The DS option, illustrated below, is for a Drilled Star that is available on sizes 15 to 25 only. This option is to allow
unshielded wires to pass through the assembly.
øH MAX
STAR SIZE 15 17 19 21 23 25
ØD MAX
3.0
[0.12”]
6.0
[0.24”]
9.0
[0.35”]
12.0
[0.47”]
15.0
[0.59”]
18.0
[0.71”]
3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard.
If the optional quantity is selected then 2 items 4 will be supplied - one “split” and the other one standard.
See below for illustration.
EXAMPLE: FERRULE QUANTITY CODE -A13
-A13 = -A10 SPLIT STAR + -A3 STANDARD STAR
4. Assembly is to be permanently marked with Code Identity Number and Part Number.
(e.g. 06090 HEX54-AB-00-21-A9-1)
