HMC551LP4

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 4
Harmonics of LOMxN Spurious @ IF Port
nLO
mRF 0 1 2 3 4
0 xx -3 33 21 21
1 4 0 13 35 45
2 81 68 63 60 74
3 87 102 85 74 71
4 106 96 102 103 103
RF Freq. = 0.9 GHz @ -10 dBm
LO Freq. = 0.8 GHz @ 0 dBm
All values in dBc relative to the IF power level.
nLO Spur @ RF Port
LO Freq. (GHz) 1 2 3 4
0.7 24 21 34 40
0.8 25 22 34 49
0.9 27 23 38 57
1.0 28 23 43 45
1.1 29 24 43 54
1.2 30 25 37 61
LO = 0 dBm
All values in dBc below input LO level measured at RF port.
Typical Supply Current
Vcc Icc (mA)
+5.0 62 mA
HMC551LP4 / 551LP4E
v02.1210
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 0.8 - 1.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 5
Outline Drawing
Absolute Maximum Ratings
RF / IF Input (Vcc= +5V) +31 dBm
LO Drive (Vcc= +5V) +10 dBm
BIAS +7 Vdc
Junction Temperature 150°C
Continuous Pdiss (T = 85°C)
(derate 9.5 mW/°C above 85°C)
0.6 W
Thermal Resistance
(junction to ground paddle)
105.6 °C/W
Storage Temperature -65 to +150°C
Operating Temperature -40 to +85°C
ESD Sensitivity (HBM) Class 1C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[3]
HMC551LP4 Low Stress Injection Molded Plastic Sn/Pb Solder
MSL1
[1]
H551
XXXX
HMC551LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1
[2]
H551
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
HMC551LP4 / 551LP4E
v02.1210
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 0.8 - 1.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 6
Pin Number Function Description Interface Schematic
1 MIX LO
This pin is DC coupled and matched to 50 Ohms.
An off chip DC blocking capacitor is required.
2, 6 - 9,
11 - 17, 19 - 24
N/C
No connection. These pins may be connected to RF
ground. Performance will not be affected.
3 BIAS
Power supply for the LO amplier Bias resistor is
required . Three external bypass capacitors are recom-
mended for optimum performance, as illustrated in the
application circuit.
4 GND
Backside of package has exposed metal ground
paddle that must also be connected to ground.
5 LO
This pin is DC coupled and matched to 50 Ohms from
0.8 to 1.2 GHz. An off chip DC blocking capacitor is
required.
10 IF
This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked
externally using a series capacitor whose value has
been chosen to pass the necessary IF frequency
range. For operation to DC, this pin must not source/
sink more than 18 mA of current or die non-function
and possible die failure will result.
18 RF
This pin is DC coupled
and matched to 50 Ohms.
Pin Descriptions
HMC551LP4 / 551LP4E
v02.1210
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 0.8 - 1.2 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D

HMC551LP4

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
RF Mixer Hi IP3 DB Mix w/LO Amp 0.8 - 1.2 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet