Enpirion
®
Power Evaluation Board User Guide
EP5368 PowerSoC
Dynamically Adjustable Output
The EP5368QI is designed to allow for dynamic switching between the predefined
voltage levels by toggling the VID pins. The inter-voltage slew rate is optimized to
prevent excess undershoot or overshoot as the output voltage levels transition. The slew
rate is defined in the datasheet.
This feature can be tested by connecting the VSx jumper center pins to logic drivers to
toggle between the various V
OUT
states.
Input and Output Capacitors
The input capacitance is a single 0603 X5R MLCC. Please see the datasheet for the exact
value. There are pre-tinned pads that allows for one additional 0603 capacitor to
experiment with input filter performance.
The output capacitance requirement is a single 0805 X5R MLCC. Please see the
datasheet for the exact value. The board has pre-tinned pads for up to 2 additional 0805
output capacitors.
NOTE: Capacitors must be X5R or X7R dielectric formulations. Do not use Y5V
or any similar dielectric.
Page 5 of 7
www.altera.com/enpirion