Si590/591
Rev. 1.2 15
REVISION HISTORY
Revision 1.2
June, 2018
Changed “Trays” to “Coil Tape” in 3. "Ordering Information" on page 8.
Revision 1.1
December, 2017
Added 3.2 x 5 mm package.
Revision 1.0
Updated 2.5 V/3.3 V and 1.8 V CML output level specifications in Table 3 on page 4.
Updated Si590/591 devices to support frequencies up to 810 MHz for LVPECL, LVDS, and CML outputs.
Separated 1.8 V, 2.5 V/3.3 V supply voltage. specifications for CML output in Table 3 on page 4.
Updated Note 1 of Table 4 on page 4 to refer to AN256.
Updated Table 4 on page 4.
Updated phase jitter specification.
Updated Table 6 on page 5 to include the "Moisture Sensitivity Level" and "Contact Pads" rows.
Updated Figure 3 and Table 15 on page 13 to reflect specific marking information.
Added Table 7, “Thermal Characteristics,” on page 5.
Rearranged sections to conform to new quality standard.
Revision 0.4
Added ±7 ppm temperature stability ordering option in Table 4 on page 4 and Figure 1 on page 8.
Revision 0.3
Updated Table 4 on page 4 by adding the 155.51 MHz “Phase Jitter (RMS) (LVPECL/LVDS/CML)” row.
Updated and clarified Table 6 on page 5 to correct typos and include the “Moisture Sensitivity Level” and
“Contact Pads” rows.
Corrected BSC value in rows D and E in Table 11 on page 9.
Revision 0.25
Total Stability Maximum changed to ±30 in Table 2 on page 3.
Total Stability Maximum changed to ±30 in Figure 1 on page 8.
