ACSC08-51SURKWA

SPEC NO: DSAG8881 REV NO: V.9A DATE: DEC/21/2015 PAGE: 1 OF 5
APPROVED: Wynec CHECKED: Joe Lee DRAWN: M.Liu ERP: 1351000561
SURFACE MOUNT DISPLAY
Part Number: ACSC08-51SURKWA Hyper Red
Features
z 0.8 inch digit height.
z Low current operation.
z Excellent character appearance.
z Mechanically rugged.
z Gray face,white segment.
z Package: 200pcs/ reel
z Moisture sensitivity level : level 2a.
z RoHS compliant.
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
Package Dimensions& Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
Red
SPEC NO: DSAG8881 REV NO: V.9A DATE: DEC/21/2015 PAGE: 2 OF 5
APPROVED: Wynec CHECKED: Joe Lee DRAWN: M.Liu ERP: 1351000561
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (ucd) [1]
@ 10mA
Description
Min. Typ.
Hyper Red (AlGaInP) White Diffused
21000 47000
Common Cathode,
Rt.Hand Decimal.
*5600 *12000
ACSC08-51SURKWA
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 645 nm I
F=10mA
λD [1] Dominant Wavelength Hyper Red 630 nm I
F=10mA
Δλ1/2 Spectral Line Half-width Hyper Red 28 nm I
F=10mA
C Capacitance Hyper Red 35 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Hyper Red 1.85 2.5 V IF=10mA
I
R Reverse Current Hyper Red 10 uA VR=5V
Parameter Values Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 185 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAG8881 REV NO: V.9A DATE: DEC/21/2015 PAGE: 3 OF 5
APPROVED: Wynec CHECKED: Joe Lee DRAWN: M.Liu ERP: 1351000561
Hyper Red ACSC08-51SURKWA

ACSC08-51SURKWA

Mfr. #:
Manufacturer:
Kingbright
Description:
LED Displays & Accessories Single Red 630nm Common Cathode
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet