UniPac2 Family Table
Customer Information
PN
Rated
Inductance
µH
OCL
nominal
+/-20%
µH
Note(1)
I rms
Amperes
Note(2)
Isat
Amperes
Note(3)
DCR
ohms (Ω)
maximum.
@ 20°C.
UP2-R47 .47 .595 10.1 11.4 .0049
UP2-1R0 1.0 1.00 9.0 9.9 .0081
UP2-1R5 1.5 1.46 8.1 7.9 .0103
UP2-2R2 2.2 2.39 6.9 6.1 .0115
UP2-3R3 3.3 3.3 6.5 5.1 .0138
UP2-4R7 4.7 4.77 5.7 4.2 .0173
UP2-6R8 6.8 6.63 5.0 3.6 .0230
UP2-8R2 8.2 8.71 4.7 3.2 .0245
UP2-100 10 9.73 4.3 3.3 .0299
UP2-150 15 15.43 3.6 2.4 .0449
UP2-220 22 22.50 2.9 2.0 .0644
UP2-330 33 33.13 2.4 1.7 .0989
UP2-470 47 48.65 1.9 1.4 .1461
UP2-680 68 68.17 1.7 1.2 .1898
UP2-820 82 85.60 1.5 1.0 .2473
UP2-101 100 102.60 1.4 .95 .2772
UP2-151 150 152.70 1.1 .78 .4244
UP2-221 220 230.00 .93 .62 .6360
UP2-331 330 338.00 .76 .51 .9775
UP2-471 471 471.8 .55 .44 1.31
Part number definition:
First 3 characters = Product code and size.
Last 3 characters = Inductance in µH. R=decimal point.
If no R is present third character = # of zeros.
THis Document Subject To Change Without Notice
Uncontrolled Document
Notes:
Cooper Electronic Technologies
(1) Test parameters: 0.250Vrms, 100KHz, and 0.0Adc.
3601 Quantum Boulevard,Boynton Boulevard,FL 33426
(2) Rms current for a ∆T of 40°C. at an ambient temeperature of 85°C..
(3) Peak current for approximateley a 10% rolloff.
UniPAc 2 Data Sheet
(4) Units supplied in tape and reel (600 units per 13” reel) packaging. EIA481 compliant.
(5) OCL= Open circuit inductance .
(6) Hipot: winding to core 300Vdc min.
SIZE Drawing Number:
UP2 Inductor Line
A Revision Level: J
