Rev. B 05/15
4
CAP200DG
www.power.com
Notes
A. Saturation current specications ensure a natural RC discharge characteristic at all voltages up to 265 VAC peak with the external resistor
values specied in Component Selection Table 1.
B. Specications are guaranteed by characterization and design.
Absolute Maximum Ratings
(4)
DRAIN Pin Voltage
(1)
............................................................1000 V
DRAIN Peak Current
(2)
.......................................................5.333 mA
Storage Temperature ..............................................-65 °C to 150 °C
Lead Temperature
(3)
.............................................................. 260 °C
Operating Ambient Temperature .............................. -10 °C to 105 °C
Maximum Junction Temperature .............................. -10 °C to 110 °C
Notes:
1. Voltage of D1 pin relative to D2 pin in either polarity.
2. The peak DRAIN current is allowed while the DRAIN voltage is
simultaneously less than 400 V.
3. 1/16 in. from case for 5 seconds.
4. The Absolute Maximum Ratings specied may be applied one at a
time without causing permanent damage to the product.
Exposure to Absolute Maximum Rating conditions for extended
periods of time may affect product reliability.
Parameter Symbol
Conditions
T
A
= -10 to 105 °C
(Unless Otherwise Specied)
Min Typ Max Units
Control Functions
AC Removal
Detection Time
t
DETECT
Line Cycle Frequency 47-63 Hz 22 31.4 ms
Drain Saturation
Current
A,B
I
DSAT
CAP200DG 2.5 mA
Supply Current I
SUPPLY
T
A
= 25 °C
21.7 mA
Thermal Resistance
Thermal Resistance: D Package
(1)
:
(q
JA
) .................160 °C/W (Single layer JEDEC PCB)
(q
JC
) ..........................................40 °C/W (Bottom)
(q
JC
) ............................................... 75 °C/W (Top)
Notes:
1. Reference thermal resistance test conditions: JEDEC JESD51-3,
SEMI Test Method #G43-87, and MIL-STD-883 Method 10121.1.
