© Semiconductor Components Industries, LLC, 2012
August, 2012 − Rev. 12
1 Publication Order Number:
MKP1V120/D
MKP1V120 Series
Sidac High Voltage
Bidirectional Triggers
Bidirectional devices designed for direct interface with the ac power
line. Upon reaching the breakover voltage in each direction, the device
switches from a blocking state to a low voltage on−state. Conduction
will continue like a Triac until the main terminal current drops below
the holding current. The plastic axial lead package provides high pulse
current capability at low cost. Glass passivation insures reliable
operation.
Features
• High Pressure Sodium Vapor Lighting
• Strobes and Flashers
• Ignitors
• High Voltage Regulators
• Pulse Generators
• Used to Trigger Gates of SCR’s and Triacs
• Indicates UL Registered − File #E210057
• These are Pb−Free Devices*
MAXIMUM RATINGS (T
J
= 25°C unless otherwise noted)
Rating
Symbol Value Unit
Peak Repetitive Off−State Voltage
(Sine Wave, 50 to 60 Hz, T
J
= − 40 to 125°C)
MKP1V120, MKP1V130, MKP1V160
MKP1V240
V
DRM
,
V
RRM
"90
"180
V
On-State Current RMS (T
L
= 80°C,
Lead Length = 3/8″, All Conduction Angles)
I
T(RMS)
"0.9 A
Peak Non−repetitive Surge Current
(60 Hz One Cycle Sine Wave, T
J
= 125°C)
I
TSM
"4.0 A
Operating Junction Temperature Range T
J
−40 to +125 °C
Storage Temperature Range T
stg
−40 to +150 °C
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, Junction−to−Lead
Lead Length = 3/8″
R
q
JL
40 °C/W
Lead Solder Temperature
(Lead Length w 1/16″ from Case, 10 s Max)
T
L
260 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
SIDACS
0.9 AMPERES RMS
120 − 240 VOLTS
MT1 MT2
()
http://onsemi.com
AXIAL LEAD
CASE 59
STYLE 2
MARKING DIAGRAM
A = Assembly Location
MKP1Vxx0 = Device Number
x= 12, 13, 16 or 24
YY = Year
WW = Work Week
G =Pb−Free Package
A
MKP
1Vxx0
YYWW G
G
(Note: Microdot may be in either location)
See detailed ordering and shipping information on page 2 of
this data sheet.
ORDERING INFORMATION
