KXOB22-12X1

IXYS reserves the right to change limits, test conditions and dimensions © 2010 IXYS All rights reserved
IXYS KOREA LTD.
1 IXYS Corporation
906-5 Iui-dong, Yeongtong-Gu, Suwon, Gyeonggi-Do (Korea) 1590 Buckeye Drive, Milpitas, CA 95035-7418
Phone +82-31-888-5232, Fax +82-31-888-5233 Rev. MAR. 2011 Phone (408) 457-9000, Fax 408-496-0670
IXOLAR
TM
High Efficiency SolarBIT.
Description
IXOLAR
TM
SolarBITs are IXYS’ product line of SolarBITs made of monocrystalline, high efficiency solar
cells. The IXOLAR
TM
SolarBITs is an ideal for charging various battery powered and handheld consumer
products such as mobile phones, cameras, PDAs, MP3-Players and toys. They are also suitable for
industrial applications such as wireless sensors, portable instrumentation and for charging emergency
backup batteries.
With a cell efficiency of typically 22% measured at a wafer level, SolarBITs give the ability to extend run
time even in "low light" conditions and increase battery life and run time in a small footprint, which can be
easily accommodated in the design of Portable Products. The design allows connecting SolarBITs flexibly in
series and/or parallel to perfectly meet the application’s power requirements.
IXOLAR
TM
products have a very good response over a wide wavelength range and therefore can be used in
both indoor and outdoor applications.
Product and Ordering Information (Measured in Package)
(parameters given are typical values)
Dimensions (L x W x H): 22 x 7 x 1.8 [mm]
SolarBITs Weight: 0.5 grams
SolarBITs are compliant to the RoHS Norm.
KXOB22-12X1 Electrical Characteristics (Measured in Package)
Symbol Cell Parameter Typical
Ratings *
Units
VOC open circuit voltage 630
mV
JSC short circuit current density 42.4
mA/cm
2
Vmpp voltage at max. power point 501
mV
Jmpp current density at max. power point 37.2
mA/cm
2
Pmpp maximum peak power 18.6
mW/cm
2
FF fill factor > 70
%
η solar cell efficiency 22
%
ΔVOC/ΔT
open circuit voltage temp. coefficient -2.1
mV/K
ΔJSC/ΔT
short circuit current temp. coefficient 0.12
mA/(cm²K)
* All values measured at Standard Condition: 1 sun (= 100 mW/cm²), Air Mass 1.5, 25°C
Part Number
Open Circuit
Voltage [V]
Short Circuit
Current [mA]
Typ. Voltage
@ Pmpp [V]
Typ. Current
@ Pmpp [mA]
KXOB22-12X1 0.63 50.0 0.50 44.6
Features
• Monocrystalline silicon technology
• High efficiency outdoor and indoor
• Long life and stable output
• Sealed Package
• High mechanical robustness
• Surface Mount Package
• Reflow Solderable
Applications
• Battery chargers for portables such as cell
phones, PDAs, GPS-Systems, …
• “Green” electricity generation
• Power backup for UPS, Sensors, Wearables
Advantages
• Automatic Pick & Place Mounting
• One Product for Multiple Applications
• Flexible Integration into the Application
IXYS reserves the right to change limits, test conditions and dimensions © 2010 IXYS All rights reserved
IXYS KOREA LTD.
2 IXYS Corporation
906-5 Iui-dong, Yeongtong-Gu, Suwon, Gyeonggi-Do (Korea) 1590 Buckeye Drive, Milpitas, CA 95035-7418
Phone +82-31-888-5232, Fax +82-31-888-5233 Rev. MAR. 2011 Phone (408) 457-9000, Fax 408-496-0670
Typical SolarBIT Performance Data (Measured in Package)
Open-Circuit Voltage vs. Irradiance External Quantum Efficiency
IXYS reserves the right to change limits, test conditions and dimensions © 2010 IXYS All rights reserved
IXYS KOREA LTD.
3 IXYS Corporation
906-5 Iui-dong, Yeongtong-Gu, Suwon, Gyeonggi-Do (Korea) 1590 Buckeye Drive, Milpitas, CA 95035-7418
Phone +82-31-888-5232, Fax +82-31-888-5233 Rev. MAR. 2011 Phone (408) 457-9000, Fax 408-496-0670
Package front-side and back-side view.
SolarBIT Pad Design. (Dimensions in millimeters)
Front-side View details Back-side View details
SolarBIT PCB Layout Recommendation:
The PCB layout foot print should be equivalent to the layout of the SolarBIT but on the contact pads on the short end(s) it should be
half a millimeter larger than the SolarBIT. For the KXOB22-12x1 one may use two pads of (6 x 2.5)mm size with 18mm spacing.
Moisture Sensitivity, Reflow Soldering and Washing Information
IXYS has characterized the moisture reflow sensitivity of the SolarBIT using IPC/JEDEC standard J-STD-020. Moisture uptake from
atmospheric humidity occurs by diffusion. During the solder reflow process, in which the component is attached to the PCB, the whole
body of the component is exposed to high process temperatures. The combination of moisture uptake and high reflow soldering
temperatures may lead to moisture induced delamination and cracking of the component. To prevent this, this component must be
handled in accordance with IPC/JEDEC standard J-STD-020 per the labeled moisture sensitivity level (MSL), level 1. IXYS does not
recommend the use of chlorinated solvents.
Upon reflow soldering for surface mounting, we recommend to use low temperature solder paste like lead-free Sn-57Bi-1Ag-β
composite paste. For instance, we recommend the lead-free solder paste LST5710 manufactured by Seoul Alloy Metal Co. Ltd, where
it recommends 220±3°C peak temperatures at the reflow zone above 200°C for about 1 min.
Tube Carrier Packaging
SolarBITs are shipped in 460 mm long clear PVC carrier tubes with antistatic coating. A tube contains 20 SolarBIT devices.

KXOB22-12X1

Mfr. #:
Manufacturer:
Description:
MONO SOLAR CELL 22MM X 7MM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet