Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 MI-200 DC-DC Converters 50 to 100 Watts Rev. 1.4 Page 1 of 6
Set your site on VICOR at vicorpower.com
Input Voltage
Operating Storage
I = –40 to +85 I = – 55 to +100
M = –55 to +85 M = – 65 to +100
Overtemperature shutdown 95°C typical
(recycle power to restart)
Features
• Inputs:
28 Vdc per MIL-STD-704D/E/F
155 Vdc per MIL-STD-1399A
270 Vdc per MIL-STD-704D/E/F
• Single output: 2 – 48 Vdc
• Up to 23 W/in
3
• MIL-STD-810 environments
• Up to 90% efficiency
• Remote sense
• Current limit
• OVP and thermal shutdown
• Power boosters for higher power outputs
• ZCS power architecture
• Low noise FM control
• Size: 4.6" x 2.4" x 0.5"
(116,8 x 61,0 x 12,7 mm)
Product Highlights
The MI-200 family of DC-DC converters is
designed for applications utilizing distributed
power architectures. Based on Vicor’s VI-200 /
VI-J00 family of zero-current switching,
component level DC-DC converters, the MI-200
family offers exceptional performance in terms of
power density, efficiency, noise, ease of use, and
reliability.
Fully encapsulated in Vicor’s industry standard
package, the MI-Series meets MIL-STD-810
environmental requirements for humidity, fungus,
salt-fog, explosive atmosphere, acceleration,
vibration, and shock.
Standard features such as wide output trim-
ming/programming, current limiting, remote
sense, output inhibit, and latching OVP and OTP
combine to offer the highest degree of protection,
versatility, and reliability for power systems.
Packaging Options
Standard: Slotted baseplate
SlimMod: Flangeless baseplate, option suffix: - S
Example: MI - 2XX - XX - S
FinMod: Finned heat sink, option suffix:
- F1, - F2, -F3 or -F4
Examples:
MI - 2XX - XX -F1, 0.25" fins, longitudinal
MI - 2XX - XX -F2, 0.50" fins, longitudinal
MI - 2XX - XX -F3, 0.25" fins, transverse
MI - 2XX - XX -F4, 0.50" fins, transverse
≥ 5 V <5 V
Y = 50 W Y = 10 A
X = 75 W X = 15 A
W= 100 W W= 20 A
V =— V = 30 A
For additional output power,
100 W and 75 W booster modules available
Change (MI-2xx-xx) to (MI-Bxx-xx)
Z =2.0 V
Y =3.3 V
0 =5.0 V
X =5.2 V
W =5.5 V
V =5.8 V
T =6.5 V
[d]
R =7.5 V
[d]
M = 10 V
1 = 12 V
P = 13.8 V
2 = 15 V
N = 18.5 V
3 = 24 V
L = 28 V
J = 36 V
K = 40 V
4 = 48 V
MI-2
Converter Selection Chart
Semi-custom driver and booster modules available, consult factory.
Product Grade Temperature (°C)
Output Power/Current VOUT
Output Voltage
Nominal Range Transient
[a]
Notes
2 = 28 V 18 – 50 V
[b]
60 V 28 Vdc input per MIL-STD 704D/E/F
5 = 155 V 100 – 210 V 230 V 155 Vdc input per MIL-STD-1399A
6 = 270 V 125 – 400 V
[c]
475 V 270 Vdc input per MIL-STD-704D/E/F
7 = 165 V 100 – 310 V n/a
Data Sheet
MI-200
DC-DC Converters
50 to 100 Watts
[d] 75 W max power for 28 V input
[a]
Transient voltage for 1 second
[b]
16 V operation at 75% load
[c]
MI-26Z-xV, MI-26Y-xV rated at 75% load from 125 – 150 VIN