© NXP B.V. 2015. All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
LPCXpresso4337 Development Board
Rev. 1.0 — 19
th
January 2015
The LPCXpresso family of boards provides a powerful and flexible development system for NXP's Cortex-
M MCUs. The LPCXpresso4337 board has been developed by NXP to enable evaluation of and
prototyping with the LPC4300 family of MCUs, and features the LPC4337 in its 100 PIN BGA package
option.
Feature summary
The LPCXpresso4337 board includes the following features:
LPC4337 dual-core (M4F and M0+) MCU running at up to 208MHz
On-board high-speed USB based debug probe with CMSIS-DAP and LPCXpresso IDE Redlink
protocol options, can debug the on-board LPC4337 or external target
Support for external debug probes
Tri-color LED
Target Reset, ISP and WAKE buttons
Expansion options based on Arduino UNO R3 and Pmod™, plus additional expansion port pins
On-board 1.8/3.3V or external power supply options
On-board Ethernet PHY (output available at expansion connectors)
High speed USB A/B connector for host or slave operation
8Mb Macronix quad SPI flash
UART, I
2
C and SPI port bridging from LPC4337 target to USB via the on-board debug probe
FTDI UART connector
LPCXpresso IDE
LPCXpresso IDE supports programming and debugging LPCXpresso boards using the on-board CMSIS-
