MKT1813
www.vishay.com
Vishay Roederstein
Revision: 04-Jul-13
6
Document Number: 26013
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Attention: Capacitors with L > 31.5 mm only as bulk available
Note
(1)
Tolerance codes: 4 = 5 % (J); 5 = 10 % (K); 6 = 20 % (M)
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
or end of catalog.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the capacitor body is in good contact with the
printed-circuit board:
• For L 19 mm capacitors shall be mechanically fixed by the leads.
• For larger pitches the capacitors shall be mounted in the same way and the body clamped.
• The maximum diameter and length of the capacitors are specified in the “Dimensions” table.
• Eccentricity as shown in the drawing below.
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
• Product height with seating plane as given by “IEC 60717” as reference: h
max.
h + 0.4 mm or h
max.
h' + 0.4 mm
Storage Temperature
T
stg
= - 25 °C to + 35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
RECOMMENDED PACKAGING
PACKAGING CODE TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING CODE EXAMPLES
G Ammo - MKT1813-422-014-G x
R Reel 350 MKT1813-422-014-R x
- Bulk - MKT1813-422-014 x
EXAMPLE OF ORDERING CODE
TYPE CAPACITANCE CODE VOLTAGE CODE TOLERANCE CODE
(1)
PACKAGING CODE
MKT1813 410 06 5 G